1965 GMC in the alps. Greetings from Austria.

[GMCTom]

The big part of the engine is back in the truck

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Mounting the timing chain cover and a new timing chain




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




Putting the cleaned oil pan back on the engine




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




Engine is ready for transport

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?






To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




And back in the frame. Exactly one year after pulling it out

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Used some new motor mounts from Rockauto. They fit perfect.

The heads get




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



The cylinder heads are currently being redesigned. We have reground the valves and the valve seats are milled. An exhaust valve was burned. I bought also a new one from Rockauto but the slot on the end of the valve was on the wrong position. We also ground a new slot in.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




The last days I cleaned up the flywheel. After reading some threads in the forum it seems to be a desaster with the clutch

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Luckily I have the same flywheel as Pepsi in his truck.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I've ordered the AMS 04528 clutch on Rockauto. Tomorrow I will receive it. After reading in my book there are four different type of clutches. I think I have the Borg Style. But I'm not sure because the spring is diaphragm style.
I really hope it will fit.




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

[Funky61]

Great Progress GMCTOM! Thanks for posting the photos. What brand/Model of engine stand are you using?

[GMCTom]

Thank you Funky
I bought the engine stand in a german webshop:



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Its also available from KS Tools but it costs more than twice.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

[GMCTom]

A Healthy Happy New Year to everybody!

Little update. Unfortunately, there is not much going on at the moment. It's very cold here

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Mounted the transmission on the bellhousing and the new driveshaft. The old one was no longer usable. Cylinder heads and other parts are also back on the block. Here are some pictures.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I also added a fuel pressure gauge. I'm not happy with the airfilter. I think I will change it with a black one. This was the first thing I bought when I bought the truck

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



At the moment I'm trying with the new exhaust pipes. I will add a steel exhaust with 2 1/4" diameter and Flowmonster mufflers. They are the same like the Flowmaster 40.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I can't wait to start the engine

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I ordered a new waterneck (75 Pontiac TransAm) because the old one was a modified from a Chevy small block. Let's see if it fits.

[GMCTom]

I forgot the information about the clutch.

Unfortunately the Rhino clutch did not fit

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I did it like MilitaryChevy (thank you) and milled something away from the hub.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

[FetchMeAPepsi]

Is that the three finger rhino pak clutch or a different one? What did you mill down?

[GMCTom]

Yes Pepsi, this is the three finger clutch. I think you used the same?

I milled down the hub on the flywheel side (red mark on the photo). I think I milled down 8mm. The hub sticks out on the wrong side so it would rub against the flywheel. The original clutch is flat on the flywheel side.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Here the flat side of the original clutch



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

[FetchMeAPepsi]

Yes, I used the same one. I don't notice any rubbing though. It all bolted up just fine. Now I'm wondering if i'm rubbing my flywheel in there....

[GMCTom]

Originally Posted by FetchMeAPepsi

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Yes, I used the same one. I don't notice any rubbing though. It all bolted up just fine. Now I'm wondering if i'm rubbing my flywheel in there....

Hmm... I think you would hear that. I suspect that the hubs are never assembled in the same order/direction during the production of the clutch. Possibly yours was pressed in the other way around. TJ had the same problems with his Rhino.

[GMCTom]

Hey guys. The day of the day was at the weekend

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



We started the engine. I was a little nervous but it runs great. The sound is awesome. I installed FlowMonster Mufflers (the same as the FlowMaster 40).

Unfortunately, I only have poor video quality. I will post another video from the next run.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?