Pay Dues or become a Site Supporter |
|
Exterior, Bodywork, Paint and Glass Beauty is only 4 coats deep... |
|
Thread Tools |
#1
|
|||
|
|||
Lmc truck
I have come across some photos online of people unhappy with the quality of body panels purchased from lmc truck. Does anyone have experience with the company and could you recommend whether or not their 60-66 parts are worth using or would it be better to seek alternatives or fabricate my own patch panels.
Sent from my SM-S906U using Tapatalk |
#2
|
||||
|
||||
Re: Lmc truck
i have used lmc parts for a couple trucks. front fenders are usable. the doors i got were bad, not the right shape. bought doors from another vender, came in the same boxes and did not fit any better. you would have to cut and weld to make work. lmc doesnt make doors, they all come from china.
|
#3
|
||||
|
||||
Re: Lmc truck
Not sure if you mean patch panels or full fenders/hoods/etc. As ilvracn said, chances are, all are from the same "The Beijing Peoples Republic Parts Factory". Same parts, different USA vendor. Will need tweaked now and then. It's part of the "hobby" to learn how to make it fit. Patch panel repair technique is a large conversation.
Every vendor who sells 40's-60's sheet metal will have complaints about "their" parts. The parts are getting better. The truck gets tweaked/twisted by the road and by previous repairs, the parts get tweaked buy tight packing across the ocean on a ship, then "handled" by many wholesalers, suppliers and vendors hands and we have to re-tweak or untweak them. It's fun. Kind of. Last edited by AZKen; October 31st, 2022 at 10:31 PM. |
#4
|
|
Re: Lmc truck
Quote:
__________________
My 60-66 GMC Projects: 1960 1001 Custom Cab short wideside BBW, 305A V6, factory PB, Hood Jet, Radio and Hydramatic. 1962 K1000 4x4 short wideside, BBW, 305D w/ SM420, PTO Winch 1966 1001 Custom Cab short wideside, w/ super rare Sport Trim option interior (bucket seats) |
#5
|
|||
|
|||
Re: Lmc truck
Not here to blast any or all reproduction parts that are offered to us - just wanted to mention what road I turn to when I'm in need of sheet metal. I try to save the original as much as I can - yes - It's messy and very time consuming - and NOT at all cost effective if you figure your time spent but very rewarding after it's finished and the holes match and the body lines are somewhat close.
|
#6
|
||||
|
||||
Re: Lmc truck
Quote:
The aftermarket patch panel will give a good start especially with odd shapes. Donor pieces are the best. |
#7
|
|||
|
|||
Re: Lmc truck
I agree, use and or seek any original sheet metal you can find. But when absolutely needing sheet metal, I have learned that Key is good quality.
I too had heard of LMC having inferior sheet metal and when I was looking for some, I called them and asked what brand is the one they carry. I was told that "they didn't know". I asked again if they could find out and was still told no, they couldn't tell.
__________________
Drove and owned many, but some of the more interesting ones were: -'60 GMC 2500 Dump, 305 V-6 -'62 GMC 4000 Flatbed, 305 V-6 -'62 GMC 6500 Flatbed Dump, 478 V-6 -'67 GMC 7500 Box, 6V-53 Detroit -'71 GMC 9500 Flatbed Dump, 637 V-8 |
#8
|
||||
|
||||
Re: Lmc truck
It's all the same Chinese parts. All vendors have complaints. The panels come stacked and jammed in a cargo ship. Some get tweaked. We can't blame any one vendor. Not enough demand for US makers with US salaries. We live with it and make them fit. Cut them, bang on them, bend them, force them, weld them.
|
#9
|
|||
|
|||
Re: Lmc truck
I've been told that there is a big difference with Key parts. Not sure if Key is the brand or the vendor, but have heard from body men about the quality of them.
Edit: A quick search produced this: https://www.carparts.com/key-parts Check out the statements and guarantees in the link. The is also a Key warehouse near me, which is one of the reasons why I have learned about them.
__________________
Drove and owned many, but some of the more interesting ones were: -'60 GMC 2500 Dump, 305 V-6 -'62 GMC 4000 Flatbed, 305 V-6 -'62 GMC 6500 Flatbed Dump, 478 V-6 -'67 GMC 7500 Box, 6V-53 Detroit -'71 GMC 9500 Flatbed Dump, 637 V-8 Last edited by BillT; January 30th, 2023 at 02:58 AM. |
#10
|
|||
|
|||
Re: Lmc truck
Here is a more specific link for our '60-'66 trucks, 14 pages of parts including a good selection of sheet metal:
https://www.keypartsonline.com/1960-...eatured&page=1 Another interesting link: https://www.keypartsonline.com/about-us/
__________________
Drove and owned many, but some of the more interesting ones were: -'60 GMC 2500 Dump, 305 V-6 -'62 GMC 4000 Flatbed, 305 V-6 -'62 GMC 6500 Flatbed Dump, 478 V-6 -'67 GMC 7500 Box, 6V-53 Detroit -'71 GMC 9500 Flatbed Dump, 637 V-8 |
Bookmarks |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Re: Firewall mat from LMC | Archiver | Previous Forum Posts | 0 | March 14th, 2008 12:27 PM |
Re: [6066 GMC] Re: Firewall mat from LMC | Archiver | Previous Forum Posts | 0 | March 14th, 2008 02:57 AM |
Re: Firewall mat from LMC | Archiver | Previous Forum Posts | 0 | March 13th, 2008 05:52 AM |
Firewall mat from LMC | Archiver | Previous Forum Posts | 0 | March 12th, 2008 02:32 AM |
Re: [6066 GMC] Firewall mat from LMC | Archiver | Previous Forum Posts | 0 | March 12th, 2008 02:10 AM |