6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion


General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #1  
Old September 13th, 2022, 05:20 AM
Crosshairs6 Crosshairs6 is offline
Member
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Rep Power: 75
Crosshairs6 is on a distinguished road
Default Difference in V6 blocks

What is the difference in the engine block from 305 to 351 to 379 to 401? Is it just to cylinder bore diameter. I understand that heads will be different as well as carburetor options. I'm wanting to know about the block only. Thanks for any incite.
__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #2  
Old September 13th, 2022, 06:23 AM
Prowbar Prowbar is offline
Senior Member
 
Join Date: Dec 2020
Location: Friesland, the Netherlands
Truck: 1965 GMC 1500, 478 V6, SM420
Posts: 383
Rep Power: 181
Prowbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the rough
Default Re: Difference in V6 blocks

305, 351 and 379 all use the timing chain. 401, 432 and 478 do not as they use a gear style camshaft drive. This means there is a difference in the main oil galley to supply oil to the middle idler gear. However, a 478 or 401 is easily modified to take a timing chain.

Also my 478 has extra oil drains for accessories and governor oil connections. Bellhousing bolt patterns are the same as are the front cover bolt patterns and motor mount connections. Main and rod bearings throughout the range are the same except for the 73-74 478 which have larger mains. Pete Chronis told me this.
Reply With Quote
  #3  
Old September 13th, 2022, 02:46 PM
Crosshairs6 Crosshairs6 is offline
Member
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Rep Power: 75
Crosshairs6 is on a distinguished road
Default Re: Difference in V6 blocks

Quote:
Originally Posted by Prowbar View Post
305, 351 and 379 all use the timing chain. 401, 432 and 478 do not as they use a gear style camshaft drive. This means there is a difference in the main oil galley to supply oil to the middle idler gear. However, a 478 or 401 is easily modified to take a timing chain.

Also my 478 has extra oil drains for accessories and governor oil connections. Bellhousing bolt patterns are the same as are the front cover bolt patterns and motor mount connections. Main and rod bearings throughout the range are the same except for the 73-74 478 which have larger mains. Pete Chronis told me this.
This is good information. So, I can take a 305 block and bore it to a 351 or a 379 and all I would need to change is the pistons?
__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #4  
Old September 13th, 2022, 04:36 PM
AZKen's Avatar
AZKen AZKen is offline
Senior Member
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,605
Rep Power: 513
AZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really nice
Default Re: Difference in V6 blocks

You would have to improve aspiration.
Reply With Quote
  #5  
Old September 13th, 2022, 07:33 PM
lizziemeister'sV6 lizziemeister'sV6 is offline
-= Dues Paid =-
 
Join Date: Aug 2013
Location: Strawberry Point, Iowa
Truck: 1965 Suburban Series 1000 - 351M with mechancal tachometer - PS & PB & 2 speed Pow-R-Flow automatic
Age: 70
Posts: 227
Rep Power: 135
lizziemeister'sV6 will become famous soon enoughlizziemeister'sV6 will become famous soon enough
Default Re: Difference in V6 blocks

351 and 379 pistons have different piston pin height - same diameter but different compression height and longer rods.
Reply With Quote
  #6  
Old September 13th, 2022, 07:52 PM
Prowbar Prowbar is offline
Senior Member
 
Join Date: Dec 2020
Location: Friesland, the Netherlands
Truck: 1965 GMC 1500, 478 V6, SM420
Posts: 383
Rep Power: 181
Prowbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the roughProwbar is a jewel in the rough
Default Re: Difference in V6 blocks

Quote:
Originally Posted by Crosshairs6 View Post
This is good information. So, I can take a 305 block and bore it to a 351 or a 379 and all I would need to change is the pistons?
Unfortunately, it isn't that easy. This would require sleeving the block, otherwise, the cylinder walls will get too thin. The castings are different for each block because the bores are different.

If you want power, your best bet would be to obtain a 351 or 401 with a 6 bolt flange (if you want a direct swap into a pickup)
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference in performance of early 60's v6's verses 64 and up Archiver Previous Forum Posts 0 December 15th, 2004 01:06 AM
Re: [6066 GMC] Difference in performance of early 60's v6's verses 64 and up Archiver Previous Forum Posts 0 December 15th, 2004 12:17 AM
RE: [6066 GMC Truck] Cracked blocks on V6? Archiver Previous Forum Posts 0 May 31st, 2004 09:55 AM
Cracked blocks on V6? Archiver Previous Forum Posts 0 May 31st, 2004 06:39 AM
Re: [6066 GMC Truck] Cracked blocks on V6? Archiver Previous Forum Posts 0 May 31st, 2004 01:51 AM


All times are GMT +1. The time now is 09:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710404525|0