Pay Dues or become a Site Supporter |
|
Transmissions and Rear Ends Three on the tree or four in the floor? Shift it all here. |
|
Thread Tools |
#1
|
|||
|
|||
3.07 gears for my Dana 44
Hey there guys! My name is Ross and I have a '66 GMC C1000 that I'm restoring. It is also my daily driver though, and a big part of my commute is I27 with a 75mph speed limit. I currently have a 305E with an SM420 and what I believe is 3.73 gears, but I'm on the lookout for a good deal on a 351E (Magnum). Anyway I know 3.07 sounds tall but I can work with it and need the mileage. I've found a few of these online but I need to verify that they will fit. Am I correct that my D44 is 26 spline standard rotation? What else will I need for this conversion? I do plan on keeping the Muncie for a while also.
|
#2
|
|||
|
|||
Re: 3.07 gears for my Dana 44
I went to the local "you pull it" salvage and found a finned Dana 44 differential cover for my '66, off an Isuzu Rodeo. The '60-72 GM trucks were all pretty much gutted so I couldn't find any gearing :/
|
#3
|
|||
|
|||
Re: 3.07 gears for my Dana 44
Go back to the you pull it yard and look at early 70's to 77 chevy 1/2 ton 4x4 front ends lots of these have 3.07 dana 44 gears.
|
#4
|
|||
|
|||
Re: 3.07 gears for my Dana 44
Thanks for the heads up- there wasn't but one or two of those either though :/. Do you know if the ring and pinion from an '80 Corvette Dana 44 is the same spline count as my truck?
|
#5
|
|||
|
|||
Re: 3.07 gears for my Dana 44
What spline count are you referring to? Axle or the pinion?
|
#6
|
|||
|
|||
Re: 3.07 gears for my Dana 44
Pinion I believe. In other words can I bolt in the 3.07 ring and pinion from the Vette into my truck?
|
#7
|
|||
|
|||
Re: 3.07 gears for my Dana 44
As long as the 3.07 gears are from a Dana 44 and are standard rotation there should be no problem.
|
Bookmarks |
Tags |
dana 44 3.07 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Highway gears | Archiver | Previous Forum Posts | 0 | January 13th, 2005 12:21 AM |
Looking for 5.13 gears | Archiver | Previous Forum Posts | 0 | December 9th, 2003 02:43 AM |
TBI, gears, etc. | Archiver | Previous Forum Posts | 0 | January 24th, 2003 12:55 AM |
gears, etc. | Archiver | Previous Forum Posts | 0 | June 8th, 2002 01:33 AM |
Rear gears... | Archiver | Previous Forum Posts | 0 | June 6th, 2002 02:57 AM |