6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Transmissions and Rear Ends
#Sponsored

Transmissions and Rear Ends Three on the tree or four in the floor? Shift it all here.

Reply
 
Thread Tools
  #1  
Old November 19th, 2022, 01:28 AM
Gmguy Gmguy is offline
Junior Member
 
Join Date: Nov 2022
Location: Newtown, Pennsylvania
Truck: 1964 L7000 (V12)
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Gmguy is on a distinguished road
Default GMC 7000 V12 clutch failed

Hi - I have a 1964 GMC 7000 V12 fire engine and the clutch master or slave cylinder failed - haven’t sorted out which yet. The service manual doesn’t provide any help with identifying a part number.

Does anyone know part numbers for replacements and where to find them? Thanks!
Reply With Quote
  #2  
Old November 22nd, 2022, 07:43 AM
BobBray BobBray is offline
-= Dues Paid =-
 
Join Date: Feb 2013
Location: Los Angeles, CA.
Truck: 1967 CM 2500
Posts: 263
Thanks: 3
Thanked 3 Times in 2 Posts
Rep Power: 156
BobBray will become famous soon enoughBobBray will become famous soon enough
Default Re: GMC 7000 V12 clutch failed

You may not be able to find new clutch slaves and masters anymore, but if the bores are not bad a brake shop may be able to rebuild them. If the bores are bad, these people may be able to help:

https://whitepost.com/#hometop
Reply With Quote
  #3  
Old November 22nd, 2022, 02:20 PM
Gmguy Gmguy is offline
Junior Member
 
Join Date: Nov 2022
Location: Newtown, Pennsylvania
Truck: 1964 L7000 (V12)
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Gmguy is on a distinguished road
Default Re: GMC 7000 V12 clutch failed

Thanks Bob - never thought about a brake shop. I’ll check that out.
Reply With Quote
  #4  
Old November 24th, 2022, 05:17 PM
LEWISMATKIN's Avatar
LEWISMATKIN LEWISMATKIN is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: RIDGE MANOR, FLORIDA
Truck: 1965 1002 GMC V6-305E
Age: 65
Posts: 311
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 177
LEWISMATKIN will become famous soon enoughLEWISMATKIN will become famous soon enoughLEWISMATKIN will become famous soon enough
Default Re: GMC 7000 V12 clutch failed

is this an L7000 steel tilt cab? if it is, it takes the same master cyl. as the DFI series (cracker box cab.) clutch slave cylinders are the same through out the truck line. if the master cylinder is the problem, more than likely, you will have to send it to White Post Restorations, as bob bray suggested. they do superior work. once the repair is completed, i recommend DOT 5 brake fluid (silicone) for the simple fact that DOT5 doesn't absorb water from the air where DOT3 & DOT4 do.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old November 25th, 2022, 01:36 PM
Gmguy Gmguy is offline
Junior Member
 
Join Date: Nov 2022
Location: Newtown, Pennsylvania
Truck: 1964 L7000 (V12)
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Gmguy is on a distinguished road
Default Re: GMC 7000 V12 clutch failed

Yes, it is a tilt cab. Thanks very much for the info!
Reply With Quote
  #6  
Old November 25th, 2022, 09:32 PM
James James is online now
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 452
Thanks: 10
Thanked 5 Times in 4 Posts
Rep Power: 208
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: GMC 7000 V12 clutch failed

Quote:
Originally Posted by LEWISMATKIN View Post
is this an L7000 steel tilt cab? if it is, it takes the same master cyl. as the DFI series (cracker box cab.) clutch slave cylinders are the same through out the truck line. if the master cylinder is the problem, more than likely, you will have to send it to White Post Restorations, as bob bray suggested. they do superior work. once the repair is completed, i recommend DOT 5 brake fluid (silicone) for the simple fact that DOT5 doesn't absorb water from the air where DOT3 & DOT4 do.
Normally when you switch to DOT 5 you will need to reseal both the master and slave cylinders with compatible DOT5 seals. The same is true if you went the other way. And don't forget to thoroughly clean out the lines, any traces of the old fluid can cause problems. It is probably best to replace the hose with a new one while your doing it.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gmc 7000 bobdylan 1960-1966 GMC Marketplace 0 April 12th, 2016 04:26 AM
62 GMC 7000 with V12 on CL-5K Funky61 1960-1966 GMC Marketplace 0 January 30th, 2015 07:11 AM
Re: V12 clutch booster Archiver Previous Forum Posts 0 August 13th, 2007 08:04 AM
RE: [6066 GMC] V12 clutch booster Archiver Previous Forum Posts 0 August 10th, 2007 04:57 AM
B-7000 CAB Archiver Previous Forum Posts 0 July 20th, 2002 02:54 AM


All times are GMT +1. The time now is 03:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 921731456399|1730343395|0