6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Interiors, Dash, Lights and Electrical


Interiors, Dash, Lights and Electrical Everything Inside

Reply
 
Thread Tools
  #1  
Old December 2nd, 2014, 06:07 PM
Andice's Avatar
Andice Andice is offline
Senior Member
 
Join Date: Mar 2013
Location: Austin, TX
Truck: 1964 Fenderside 1000
Posts: 158
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 110
Andice is on a distinguished road
Default Glove Box Door Rubber Bumpers

I have located a perfect replacement part for our trucks. The comapny is Rubber The Right Way. The aftermarket versions sold by all of the usual parts vendors do not fit so don't waste your money on them. These are also available at Steele Rubber but their shipping cost is way too high. Part #03.002B
Attached Images
File Type: png rubber-parts-universal-rubber-clips-54144sma.png (7.9 KB, Multiple views, 68 clicks)
Reply With Quote
  #2  
Old December 16th, 2014, 11:40 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 132
jagarra is on a distinguished road
Default Re: Glove Box Door Rubber Bumpers

Thanks for the part number, ordered some for my glove box, had to get a GMC sign too for the outside of my garage.
Reply With Quote
  #3  
Old December 26th, 2014, 09:03 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 132
jagarra is on a distinguished road
Default Re: Glove Box Door Rubber Bumpers

I got my bumpers from Rubber the right way, but the hole size on the glove box looks like it will have to be enlarged to 3/16".
Reply With Quote
  #4  
Old December 27th, 2014, 10:55 PM
Vernski's Avatar
Vernski Vernski is offline
Member
 
Join Date: Jan 2013
Location: Rath I
Age: 77
Posts: 97
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 96
Vernski is on a distinguished road
Default Re: Glove Box Door Rubber Bumpers

Quote:
Originally Posted by jagarra View Post
I got my bumpers from Rubber the right way, but the hole size on the glove box looks like it will have to be enlarged to 3/16".
Hi Jagarra I also am looking for the right rubber bumper and this is not the right one or you wouldn't have to drill the hole out to make it fit. I broke off the teats off mine trying to pull them on even with rubber lube. What we have here is a close but no cigar situation they look like the right ones but getting them in their is not possible without drilling and that's up to the owner. I just don't think we should have to drill the hole out to make them fit from a stock standpoint. These were made for a 63-65 Riviera fender to splash pan bumper
part#03.002B. The correct one is possibly out there somewhere I just haven't
found it yet. I have been thinking about inquiring some of these mfrs about it but right now I've got bigger fish to fry. I have no problem with others drilling just not on my truck JMHO...Vernski

Last edited by Vernski; December 27th, 2014 at 10:58 PM. Reason: I guess I should have said teats
Reply With Quote
  #5  
Old December 27th, 2014, 11:39 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 132
jagarra is on a distinguished road
Default Re: Glove Box Door Rubber Bumpers

I got these to go into the hole. I cut off part of the ramp portion at 12 o'clock and at 6 o'clock. Pushed it in and pushed the leftover ramp into the hole rather than pull them in from the back. Rotated them until it worked itself in. Looks like they will work without enlarging the hole. I bought 4 of them so I would have some extras incase it was a pain to install and I broke one. Now to get some type of spring loading to open the glove box when the latch is released. The hole is an odd size, like .616. I see LMC sells a light kit with a plunger.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: Glove Box Door Cup/Drink Holder indentions Archiver Previous Forum Posts 0 April 29th, 2010 01:57 AM
Glove Box Door Cup/Drink Holder indentions Archiver Previous Forum Posts 0 April 28th, 2010 04:33 AM
Glove Box Door Cup/Drink Holder indentions Archiver Previous Forum Posts 0 April 28th, 2010 01:25 AM
Re: [6066 GMC Truck] Glove box door Archiver Previous Forum Posts 0 August 16th, 2001 02:43 AM
Glove box door Archiver Previous Forum Posts 0 August 15th, 2001 01:00 AM


All times are GMT +1. The time now is 03:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 661721571278|1720490710|0