6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Builds and Journals
#Sponsored

Builds and Journals This is where the magic happens. Photograph & document your GMC build progress for posterity.
NOTICE - Photobucket will delete your pics after a time. Use another host if possible.

Reply
 
Thread Tools
  #21  
Old September 28th, 2021, 01:11 AM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 133
jagarra is on a distinguished road
Default Re: Jethro's 1964 I1000

This knob matches the others in your dash.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Normally the heater controls are a group four lever type with a small knob. I don't recognise your switch and where it is located, maybe it was added on later.
Reply With Quote
  #22  
Old September 28th, 2021, 01:32 AM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1967
Posts: 885
Thanks: 0
Thanked 4 Times in 2 Posts
Rep Power: 350
Ed Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura about
Default Re: Jethro's 1964 I1000

Quote:

I've been looking for the elusive GMC heater knob. Pert near impossible to find.
The deluxe heater came with the slider knobs. Yours is the somewhat rare standard heater control. It came with a round, oblong knob. You should be able to see an example in these old photos.
Attached Images
File Type: jpg 0007.jpg (69.0 KB, Multiple views, 12 clicks)
File Type: jpg 0018.jpg (55.9 KB, Multiple views, 20 clicks)
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1967 CM1500 pickup 351E & NP435
Reply With Quote
  #23  
Old September 30th, 2021, 09:09 PM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

That's it, Ed. And that's about as good a pic as I've seen. It's different than the Chevy. Do you know if the Chevy knob will work until I can find the GMC knob?
Reply With Quote
  #24  
Old October 1st, 2021, 06:45 AM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1967
Posts: 885
Thanks: 0
Thanked 4 Times in 2 Posts
Rep Power: 350
Ed Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura about
Default Re: Jethro's 1964 I1000

Quote:
That's it, Ed. And that's about as good a pic as I've seen. It's different than the Chevy. Do you know if the Chevy knob will work until I can find the GMC knob?
Sorry, Jethro, but I'm not familiar with the Chevy knobs. All I can suggest is just to try it and see if it works.
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1967 CM1500 pickup 351E & NP435
Reply With Quote
  #25  
Old October 1st, 2021, 03:58 PM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

I s'pose I'll give it a try. Cold weather is coming soon.
Reply With Quote
  #26  
Old February 22nd, 2022, 02:00 AM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

Score!
I got a screamin' deal on a used C⁵lifford 4 barrel intake, Holley carb. And Clifford headers.
More stuff for spring.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



The chrome came from Amazon.
Reply With Quote
  #27  
Old July 20th, 2022, 09:54 PM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

It's been a little while since I've had a chance to do any work on the truck. Seems like there's always something else that has to be done first. Finally got some free time tho and used it well.

The P.O. had told me he just did the brakes. They worked fair... mostly. Except when they pulled hard left... sometimes. Or right... occasionally. And the brake fluid would disappear intermittently. Otherwise they were fine.

The original single line brake system is not one I like. Last year I bought a master cylinder for a 4-drum 67 C10. Also all 3 hoses and a roll of steel line and some fittings. Just now got the chance to upgrade.

The O.E. master cylinder mounts to the firewall with 2 bolts in a diagonal pattern.
The 67 master mounts horizontal.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Luckily, GMC put both bolt patterns there for me. I did have to switch the bolts around. There are 2 different length bolts. The long ones go thru the master cylinder.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Reply With Quote
  #28  
Old July 20th, 2022, 10:17 PM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

There is only the one brake line from the O.E. master cylinder. It goes down to the frame and connects to a tee. From there, one side feeds the Left front wheel cylinder and the other side feeds a line to another tee over on the right side.

I ran a new steel line from the master cylinder down to that first tee. I also ran a new short steel line over to the left front brake hose and installed a new hose while I was there.
Here's where we start to change things. After removing the steel line to the right side tee I made a new steel line all the way to the right front hose. I had purchased a new hose but this one looked fine so I left it.
Now the front brakes are isolated from the rear on one half of the new master.

Next I removed the tee from the right side and the entire steel line and crispy old hose to the rear brakes. A new steel line was installed all the way to the new rear hose.
Now the rear brakes are isolated on the other half of the new master.

The pedal was really low even after bleeding the system. Because the rod from the pedal to the master was a half inch short. I cut it and lengthened it. I can't recommend just anybody doing this. Kinda important. But that's what I did. It's sleeved. Plenty strong.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Reply With Quote
  #29  
Old July 20th, 2022, 10:40 PM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

I feel a whole lot safer now with the split brake system.

If you wanted to do this conversion and your brakes really were in good condition you'd be done. This was not the case.
When I test drove my truck it dove left hard every time. At least it was consistent now.

The next chance I got I pulled the wheels for a proper look-see.
To say I was unimpressed by the last mechanic's skills is an understatement.

Both front brakes were installed backwards. The bearings were just barely greased. Left front cylinder leaking. Right front adjuster all the way loose and froze.
Rear brakes had a leaky cylinder on the right. Both primary shoes on right rear. Both secondary shoes on left. Parking cables cut on both sides. Random hardware.

I replaced the right front hose after all. Replaced both front wheel cylinders. And put all the shoes on correctly. Adjusted everything up and bled the front again.

Stops great now!

I have the 2 rear wheel cylinders and a hardware kit. Have a replacement parking brake actuator for the missing one. Waiting on new cables. Then I'll finish up the rear brakes and be really happy.

Next project will be a radio install.
The radio hole is already hacked so I don't have to even feel guilty.
Reply With Quote
  #30  
Old July 31st, 2022, 06:37 PM
Jethro Jethro is offline
Member
 
Join Date: Jul 2021
Location: Pekin, IL
Truck: 1964 I1000
Age: 58
Posts: 55
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 41
Jethro is on a distinguished road
Default Re: Jethro's 1964 I1000

So I let better judgement prevail and worked on other stuff before the radio. Namely the headlights. They were all wonky. The left pointed kinda down and the right pointed up and right. Hard to see at night...

I ordered a whole set of adjuster kits and springs a few weeks ago and decided to tackle a quick and easy job. Or so I thought.

The grill was a little bent. Made it pretty hard just to remove the trim bezels. Thought I took a pic before. Guess not.
Anyway, once the bezels were off I could see that the springs were all stretched out and most all of the adjusters were broken. The driver side horizontal was nothing more than a sheet metal screw.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1964 GMC with 1964 Pullman Camper cbeeker 1960-1966 GMC Marketplace 9 October 21st, 2022 06:18 PM
1964 1500 BarryGMC 1960-1966 GMC Marketplace 0 November 28th, 2013 03:56 PM
Re: 1964 401 V-6 Archiver Previous Forum Posts 0 August 7th, 2002 01:32 AM
1964 401 V-6 Archiver Previous Forum Posts 0 August 6th, 2002 01:07 AM
1964 One ton Archiver Previous Forum Posts 0 May 28th, 2000 01:49 AM


All times are GMT +1. The time now is 08:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 771729009125|1727811926|0