6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion


General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #1  
Old November 20th, 2015, 06:55 PM
SkipStein SkipStein is offline
Junior Member
 
Join Date: Nov 2015
Location: Carlsbad, Ca.
Truck: 1963 GMC CarryAll
Age: 79
Posts: 2
Rep Power: 0
SkipStein is on a distinguished road
Default Plaid valve covers

Howdy;
I owned a 1963 GMC Carry All 4x4, 4 speed with a Big Block 305 V6. The engine had the 'plaid' valve covers. Concerning the why's of the plaid valve covers, the story I heard was that at the factory they pulled an engine off the line periodically to tinker with it and check the tolerances, etc. When finished, it was 'blue printed' and put back on the line with the 'plaid' valve covers. Mine was a real stump puller and ran strong. I pulled the heads off at 242K to replace the gaskets and checked the bore and valves, etc. It was less than 10 thousandth wear. I went ahead and bored it 10 thousandths to 315 cu in., replaced the valves, put it back together and it ran another several years as my daily driver and trail buster. A fine truck, for sure...
Happy trails,
Skip
Reply With Quote
  #2  
Old November 22nd, 2015, 05:38 AM
6066gmcguy's Avatar
6066gmcguy 6066gmcguy is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: Honeyville, Utah
Truck: 1965 3500 Rescue Squad
Age: 63
Posts: 613
Rep Power: 226
6066gmcguy is on a distinguished road
Default Re: Plaid valve covers

There have been many stories told about the Plaid Covers, they were Dealer Installed.

In 1963, the Plaid Covers were sent to the dealers to install on trucks in the showroom or the demo trucks. Then when a customer would ask about them, they would be told how the NEW 305E was better over the older 305D engine, fuel economy was one the selling points, "Thrifty as a Scott!", you see back in 1963 stereotyping was still OK.

As the trucks got sold the covers were not pulled off.

The following is told by Bob Bray;

There was some discussion on the 305 plaid valve covers. They had long been a big mystery to me as well, but I think I may have stumbled on an explaination some time ago. I was talking to a retired G.M.C. truck engineer (I think it was Don Meyer that I heard this story from!) who worked all through the 1960's and I asked him about those colorful valve covers and if they really ment anything. He said that as you know, the V-6 had a reputation of not being an economical engine. Many light truck customers, particularly those who had bought early 305A 1bbl. pickups, were not pleased with the fuel economy. G.M.C. sought to improve the economy of the 305 in light duty trucks, and was dyno-testing 305's with different carburetion and camshafts. Engineers in the dyno lab identified the improved engines by putting adhesive shelf paper on the valve covers, and wouldn't you just know it, 'Scotch Plaid' was what they were using. One day, some guys from marketing saw these engines being tested, and though it would be a great marking idea to actually build them that way.

So that kinda backs up the story about them being a marketing thing to sell trucks.

But now many years later, the covers can be found on years other then 1963, and many owners have found th covers and installed them on their own truck, and like myself, I had 3 sets, two have been made into wall art, and a Valve Cover Racer.
__________________
Links to Other Places:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
.
the
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.
Owner of:
1965 GMC 3500 Custom Rescue Squad {Black Built Bodies}
1968 Ford Galaxie 500 Convertible
2006 Yamaha Rhino 450
2008 GMC HHR Panel.
Reply With Quote
  #3  
Old November 22nd, 2015, 05:49 AM
6066gmcguy's Avatar
6066gmcguy 6066gmcguy is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: Honeyville, Utah
Truck: 1965 3500 Rescue Squad
Age: 63
Posts: 613
Rep Power: 226
6066gmcguy is on a distinguished road
Default Re: Plaid valve covers

Some Plaid Cover Photos.
Attached Images
File Type: jpg uvcra-01.jpg (56.3 KB, Multiple views, 5 clicks)
File Type: jpg WallArt6567Plaid.jpg (163.0 KB, Multiple views, 9 clicks)
File Type: jpg Plaid-1.jpg (39.8 KB, Multiple views, 6 clicks)
File Type: jpg 1963-john-1vc.jpg (91.6 KB, Multiple views, 9 clicks)
__________________
Links to Other Places:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
.
the
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.
Owner of:
1965 GMC 3500 Custom Rescue Squad {Black Built Bodies}
1968 Ford Galaxie 500 Convertible
2006 Yamaha Rhino 450
2008 GMC HHR Panel.
Reply With Quote
  #4  
Old November 22nd, 2015, 06:01 AM
SkipStein SkipStein is offline
Junior Member
 
Join Date: Nov 2015
Location: Carlsbad, Ca.
Truck: 1963 GMC CarryAll
Age: 79
Posts: 2
Rep Power: 0
SkipStein is on a distinguished road
Default Re: Plaid valve covers

Hello;
The version of the 'plaid valve covers' mentioned by Bob Bray seems to be in the same direction of the story I heard, as in engines tweeted and tested, blue printed and put back on the line. I never heard of the story of the dealers and marketing, but that may make sense also. Never the less, the 305 E engines were good runner, at least in my '63 Carry All.
Reply With Quote
  #5  
Old December 2nd, 2015, 04:10 PM
jimjaz's Avatar
jimjaz jimjaz is offline
Member
 
Join Date: Jan 2013
Location: Tempe AZ
Truck: 1963 K-1000 Sub, 1963 C-1000 Sub, 1965 C-1000 Sub
Posts: 56
Rep Power: 84
jimjaz is on a distinguished road
Default Re: Plaid valve covers

The story I heard from my brother-in-law who worked at GM for over 40 years told me the following about the plaid valve covers;
1) They were never offered already on the trucks from the factory.
2) They were made at the factory and sent to GMC dealers.
3) Folks who bought a 1963 model would bring their truck in for "valve train noise" under warranty. The dealer would adjust the solid lifter tappet valve train to spec's, and to identify the truck as having been serviced and the valve train adjusted, the owner coached on the differences in solid vs hydraulic valve train, and the added plastic "plaid" over metal quiets down the tappet noise as plastic is a pretty fair noise insulator in this situation.
4) He did not know why this did not continue into the 64 model and beyond, but this is why they are only correct for a 63 model truck.

For what it's worth.....
__________________
Jim Jantzen
Tempe AZ

63 GMC K1000 Sub restored original
63 GMC C1000 Sub original
65 GMC C1000 Sub OEM modified
72 GMC 1500 Super Custom SWB original
Reply With Quote
  #6  
Old December 2nd, 2015, 06:11 PM
David R Leifheit's Avatar
David R Leifheit David R Leifheit is offline
Senior Member
 
Join Date: Jan 2013
Location: Dallas, Oregon
Truck: 1960-1966 1000-4000 series
Age: 62
Posts: 281
Rep Power: 166
David R Leifheit is a jewel in the roughDavid R Leifheit is a jewel in the roughDavid R Leifheit is a jewel in the rough
Default Re: Plaid valve covers

Quote:
Originally Posted by jimjaz View Post
The dealer would adjust the solid lifter tappet valve train to spec's, and to identify the truck as having been serviced and the valve train adjusted, the owner coached on the differences in solid vs hydraulic valve train, and the added plastic "plaid" over metal quiets down the tappet noise as plastic is a pretty fair noise insulator in this situation.

For what it's worth.....
Considering the material isn't really plastic and is more like shelf paper, I doubt it would contribute to "quiet" much if at all.
__________________
--
- David R Leifheit
in Dallas, Oregon
mailto:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

(2) 1961 1500
1962 1000
1963 2500
1963 4000
1964 2500
Reply With Quote
  #7  
Old December 4th, 2015, 03:14 AM
6066gmcguy's Avatar
6066gmcguy 6066gmcguy is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: Honeyville, Utah
Truck: 1965 3500 Rescue Squad
Age: 63
Posts: 613
Rep Power: 226
6066gmcguy is on a distinguished road
Default Re: Plaid valve covers

Everyone wants their story of the Plaid covers to be the one that is true, but the truth is it was all about Sales.

I don't have a working scanner so I just shot some pics with my phone, check out the info below and then come up with some more reasons why your story it more true than the next guys, but unless you have the paper trail to back it up, its just another story.
Attached Images
File Type: jpg 20151203_194206.jpg (214.5 KB, Multiple views, 14 clicks)
File Type: jpg 20151203_194804.jpg (287.6 KB, Multiple views, 14 clicks)
File Type: jpg 20151203_194734.jpg (283.5 KB, Multiple views, 12 clicks)
File Type: jpg 20151203_194742.jpg (224.6 KB, Multiple views, 10 clicks)
File Type: jpg 0227120527.jpg (225.3 KB, Multiple views, 11 clicks)
File Type: jpg 0227120529a.jpg (203.5 KB, Multiple views, 10 clicks)
File Type: jpg 0227120529c.jpg (253.8 KB, Multiple views, 13 clicks)
File Type: jpg 0227120529b.jpg (238.0 KB, Multiple views, 10 clicks)
File Type: jpg 0227120528a.jpg (187.6 KB, Multiple views, 11 clicks)
File Type: jpg 0227120529.jpg (211.0 KB, Multiple views, 10 clicks)
__________________
Links to Other Places:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
.
the
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.
Owner of:
1965 GMC 3500 Custom Rescue Squad {Black Built Bodies}
1968 Ford Galaxie 500 Convertible
2006 Yamaha Rhino 450
2008 GMC HHR Panel.

Last edited by 6066gmcguy; December 4th, 2015 at 01:54 PM.
Reply With Quote
  #8  
Old December 10th, 2015, 02:55 AM
Justinfleenor Justinfleenor is offline
Junior Member
 
Join Date: Dec 2015
Location: Pennington gap, virginia
Truck: 68 2wd pickup lwb
Age: 36
Posts: 3
Rep Power: 0
Justinfleenor is on a distinguished road
Default Re: Plaid valve covers

Hi I'm new here I've got a 68 with a 305 e and I had a 65 with chrome or just plain metal valve covers didn't appear that anyone sanded the paint off lol and the truck was purchased from a woman when it was almost new by my grandfather, has anyone seen any?
Reply With Quote
  #9  
Old December 10th, 2015, 03:27 AM
bigblockv6 bigblockv6 is offline
Senior Member
 
Join Date: Jan 2013
Location: Rohnert Park, ca.
Truck: 1968 KM2500
Posts: 1,325
Rep Power: 415
bigblockv6 will become famous soon enoughbigblockv6 will become famous soon enough
Default Re: Plaid valve covers

As far as chrome valve covers, there were some engines with chrome valve covers for promotional display purposes. Ed Snyder can fill anyone in on this with his fathers 65 Suburban that has dealer installed 351C with chrome valve covers.
Reply With Quote
  #10  
Old December 10th, 2015, 06:44 AM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1965, 1967
Posts: 868
Rep Power: 343
Ed Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura about
Default Re: Plaid valve covers

Quote:
Originally Posted by bigblockv6 View Post
As far as chrome valve covers, there were some engines with chrome valve covers for promotional display purposes. Ed Snyder can fill anyone in on this with his fathers 65 Suburban that has dealer installed 351C with chrome valve covers.
My Dad (who turned 91 on Pearl Harbor Day) spent a lot of time at the GMC dealership in Wichita (Sauder-Lygrisse) in 1965 when he was in the process of ordering, taking delivery, and modifying the one ton Suburban. He became friends with the owners during the process. They gave him the chrome valve covers and oil cleaner housing you can see in this photo. If I remember right, they came off a showroom truck that had been sold. So they've been on the truck for 50 years now.
Attached Images
File Type: jpg Engine Right.JPG (185.7 KB, Multiple views, 16 clicks)
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1965 2500 Suburban 351C & SM420 with Watson overdrive
1967 CM1500 pickup 351E & NP435
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plaid valve covers Archiver Previous Forum Posts 1 June 12th, 2011 01:29 AM
Plaid Valve Covers Archiver Previous Forum Posts 0 November 11th, 2010 03:54 AM
Plaid Valve Covers Archiver Previous Forum Posts 0 March 26th, 2009 01:51 AM
Plaid valve covers Archiver Previous Forum Posts 0 September 7th, 2006 01:10 AM
RE: plaid valve covers Archiver Previous Forum Posts 0 March 22nd, 2002 12:09 AM


All times are GMT +1. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710424629|0