6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion


General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #1  
Old September 2nd, 2021, 05:11 AM
elirookiegmc elirookiegmc is offline
Junior Member
 
Join Date: Aug 2021
Location: Santa Ana, CA
Truck: 1960 GMC
Age: 60
Posts: 7
Rep Power: 0
elirookiegmc is on a distinguished road
Exclamation 1960 gmc trcuck

Thank you all in advance for any information regarding the following question.

I just bought a 1960 GMC truck, was told from previous owner he had been having problems with shifting gears. When I picked it up I was able to shift Reverse and First gear, but was not able to shift to 2nd and 3rd. So I looked at shifting rods and notice that a part which connects from transmission to bushings on side of frame. My questions is, does anyone know the name of this part and where I could find it. Again thank you for any information.
Reply With Quote
  #2  
Old September 2nd, 2021, 07:54 AM
AZKen's Avatar
AZKen AZKen is offline
Senior Member
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,605
Rep Power: 513
AZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really nice
Default Re: 1960 gmc trcuck

You are going to have to be more specific and give much detail when you ask questions on forums.
So here are some questions and info for you.

1. Do you have a 4 speed with granny low? floor shift?
2. Do you have a 3 speed on the column? (that seems like what you may have). SM318
3. Do you have some other transmission?

The SM318 transmission is mounted onto the bell housing and has support on the tail housing. Which I believe lands on a crossmember. This may be what you are asking for if you are talking about the tail mount. Not really called a bushing. If not, let us know. The words that throw me are: "bushing" on "side of frame"????????

SM318
Attached Images
File Type: jpg SM318.jpg (47.1 KB, Multiple views, 5 clicks)

Last edited by AZKen; September 2nd, 2021 at 08:34 AM.
Reply With Quote
  #3  
Old September 2nd, 2021, 02:11 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,724
Rep Power: 545
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1960 gmc trcuck

Ken's right. I don't have any bushing connection on my rods and I've got the Sm318 "three on the tree". You should probably post some pictures and describe which tranny you got. Parts can be hard to come by, but if it's just a bolt or something you can find them off the shelf pretty easy.
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #4  
Old September 2nd, 2021, 04:47 PM
Jim A Jim A is offline
Senior Member
 
Join Date: Jan 2013
Location: Potter Valley, CA
Truck: 1960 3/4, 4 spd, stepside
Posts: 136
Rep Power: 109
Jim A is on a distinguished road
Default Re: 1960 gmc trcuck

Lucky you with a new '60 Jimmy. We will want more info about it.
If you have visible shift linkage then you don't have a 4 speed.
That linkage system gives trouble as it wears and happens on many different makes (Ford and Chrysler, e.g.).
Take a close look for play in the various connections. They can be tightened up with home made or OEM bushings.
Good luck.
Reply With Quote
  #5  
Old September 5th, 2021, 02:02 AM
Funky61's Avatar
Funky61 Funky61 is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Corona, CA
Truck: 1961 Suburban 1962 GMC Utility
Posts: 1,130
Rep Power: 409
Funky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really nice
Default Re: 1960 gmc trcuck

Would love to see photos of your 60 GMC
__________________
1961 GMC Suburban 305A Overdrive
1962 GMC Utility 305D
Reply With Quote
  #6  
Old September 5th, 2021, 07:09 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Rep Power: 130
jagarra is on a distinguished road
Default Re: 1960 gmc trcuck

It sounds like you have a 3 speed on the column and you are out of adjustment. If your bushings are worn and too sloppy then you with have issues shifting. Here is a source for bushings. https://www.mcmaster.com/bushings/

I would start with the column in the neutral position, disconnect the rods at the transmission and place each selector on trans in neutral ( that is the center of its three positions), the rods should slip into the levers without any movement, there should be an adjustment to move the end of the rod to do so.
the positions of the levers are 1st, neutral reverse and on the other one it is 2, neutral and 3rd. I would replace the worn bushings before I started to check for the linkage being too sloppy. From what you are saying your issue going into second is the rod controlling 1, Reverse is not moving into the neutral position in time to allow the gears to go into 2nd, it's all based on timing. One set has to get to the neutral position before the other set can move all the way into the gear.
Reply With Quote
  #7  
Old September 7th, 2021, 04:30 AM
elirookiegmc elirookiegmc is offline
Junior Member
 
Join Date: Aug 2021
Location: Santa Ana, CA
Truck: 1960 GMC
Age: 60
Posts: 7
Rep Power: 0
elirookiegmc is on a distinguished road
Red face Re: 1960 gmc trcuck

Gentlemen,
Sorry for the late response, yes indeed I read my original post and did not explained the issue well enough. It was a late post while getting ready to go out of town. So lets try it again, It is a 1960 GMCwith a 305V6 and three on the column. The issue that I am having is, a broken piece with the shifting assembly. One of the pictures will show you the Linkage rods, one of the rods goes directly to the transmission, I believe that to be 1st and Reverse. It is the second rod, which by elimination would be 2nd and 3rd, does not go to transmission but to a bushing or grommet depending where you are from. This is the part that I need to replace as well as the bottom arm which is broken. So my question is, how do I remove said part and does anyone know where I can find it. I have looked for almost two weeks and no one seems to know where it can be bought. I hope this post will be a bit clearer and thank you all in advance for any information you can provide.
Attached Images
File Type: jpg linkage rod.jpg (868.2 KB, Multiple views, 13 clicks)
File Type: jpg Bottom linkage connect.jpg (850.9 KB, Multiple views, 14 clicks)
File Type: jpg BROKEN.jpg (978.7 KB, Multiple views, 10 clicks)
Reply With Quote
  #8  
Old September 7th, 2021, 04:41 AM
elirookiegmc elirookiegmc is offline
Junior Member
 
Join Date: Aug 2021
Location: Santa Ana, CA
Truck: 1960 GMC
Age: 60
Posts: 7
Rep Power: 0
elirookiegmc is on a distinguished road
Default Re: 1960 gmc trcuck

By the way here are some photos of the 60 GMC, the engine runs great. I am told the miles on it are the original miles 70,386. there is absolutely no rust anywhere and no dents, really looking forward to getting it going and before it goes in the shop for cosmetic work, taking a drive with my Dad up and down the coast.
Attached Images
File Type: jpg RIGHT SIDE.jpg (60.7 KB, Multiple views, 8 clicks)
File Type: jpg LEFT SIDE.jpg (56.8 KB, Multiple views, 8 clicks)
File Type: jpg CAB.jpg (50.7 KB, Multiple views, 6 clicks)
File Type: jpg DASH.jpg (54.7 KB, Multiple views, 7 clicks)
File Type: jpg Engine 305 V6.jpg (57.8 KB, Multiple views, 10 clicks)
Reply With Quote
  #9  
Old September 7th, 2021, 05:02 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,724
Rep Power: 545
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1960 gmc trcuck

So that first pic with the rods going to the transmission? Yeah, that second rod is supposed to go to that area too! It looks like someone took the transmission out and put it back in on top of the shifting linkage. If that's right you need to find another transmission (sm318) and either swap the whole transmission out or the part where the linkage connects. Very weird that they just left it there smashed under whatever wood piece that is.
In my thread I show a lot of transmission pics. You can see how it's supposed to look starting about midway down this page here:
https://6066gmcclub.com/showthread.php?t=47321&page=15

Those transmissions come up for sale pretty often on craigslist etc. Just pick one up and you'll be set.
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #10  
Old September 7th, 2021, 04:57 PM
Jim A Jim A is offline
Senior Member
 
Join Date: Jan 2013
Location: Potter Valley, CA
Truck: 1960 3/4, 4 spd, stepside
Posts: 136
Rep Power: 109
Jim A is on a distinguished road
Default Re: 1960 gmc trcuck

Depending on when the part was broken, it could be the reason for this beautiful truck's low mileage!
I hope replacement of the whole tranny is not really necessary.
Reply With Quote
Reply

Bookmarks

Tags
shifting rods, trasnmission

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1960 in NC Ed Snyder 1960-1966 GMC Marketplace 3 March 9th, 2017 03:28 AM
1960 BarryGMC Builds and Journals 14 September 2nd, 2013 08:09 PM
1960 Am Radio Archiver Previous Forum Posts 1 February 21st, 2011 03:54 AM
1960 Heater Archiver Previous Forum Posts 0 November 25th, 2003 12:01 AM
1960 Hood Archiver Previous Forum Posts 0 November 8th, 2000 12:08 AM


All times are GMT +1. The time now is 03:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710513769|0