Pay Dues or become a Site Supporter |
|
General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here. |
|
Thread Tools |
#1
|
|||
|
|||
Looking for information on 1960-1965 7000 series
Hey guys, I am new to the forum, and hoping that I have come to the right place to help me out. I have inherited the truck in the picture attached. It is an early 60's B7000 series with the V12 twin six motor, other than that I have very little information. I am in the process of trying to get it home, likely on a trailer at this point. I do know that the motor turns over with use of the starter, so that is a good sign.
Here is what I am having trouble with: 1. What year is this truck and what does it weigh? I have the VIN, but nothing that I have found online will decode it. Does anyone have a guide to help me figure out exact what it is that I have? And for the weight, everything that I can find is GVW of 31,000lbs. I would like to know what the actual vehicle weighs so that I know if my car hauler will handle it or I need to call in the heavies. 2. Service information. I have searched online for service manuals, and have come up empty handed. I am specifically interested in the brake system at this point, as I need to get the truck rolling to load and unload it. The air brake system seems to work a little differently than any modern system that I can find youtube videos on. I also would like to know specs on the brake components if I need to replace. Where does one find parts for these trucks? Again, searching online comes up empty handed. My local autoparts stores have no idea what I am talking about. Any help/resources would be greatly appreciated. |
#2
|
||||
|
||||
Re: Looking for information on 1960-1965 7000 series
Hello and Welcome to the Forum PBUYDENS!
Great Looking B-Model with the V-12 you inherited. There are great links on the V-12 referenced on the Jolly Website as well as a VIN decoder. https://6066gmcguy.com/index.php I don't have a manual for that B7000 series, but I found a few old files with some information. Other members with more experience about these BIG Trucks and the V-12, will chime in soon enough.
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D Last edited by Funky61; September 4th, 2024 at 12:34 AM. |
#3
|
||||
|
||||
Re: Looking for information on 1960-1965 7000 series
Quote:
Keep us posted on your progress, and don't give up! We'll be looking forward to more photos too.
__________________
Ed Snyder Medford, Oregon 1962 1000 Pickup 401M & Muncie 318 with overdrive 1962 K1000 Suburban 401M & SM420 1967 CM1500 pickup 351E & NP435 |
#4
|
|||
|
|||
Re: Looking for information on 1960-1965 7000 series
I tried to look up some information for you, not much out there. I did find some links that you will find helpful:
Facebook group for the 702 V12 https://www.facebook.com/groups/2199192940390615/ Possible manual https://www.autopaper.com/gmc/b7000.php Owner's and Driver's Manual https://www.abebooks.com/servlet/Boo...?bi=9579867786 ThunderV12, LLC https://thunderv12.com/ the 6066 GMC Guy web pages https://6066gmcguy.com/ Misc. video and information https://www.youtube.com/watch?v=ni4eX-DZAAA https://www.macsmotorcitygarage.com/...ubic-inch-v12/ Have fun. Great project. Some of the other members might have more info for you. |
#5
|
|||
|
|||
Re: Looking for information on 1960-1965 7000 series
Almost forgot to mention. Be sure to clean out the fuel system from fuel tank all the way to the carburetors. It is possible whatever is left (even if it had completely dried up) in the fuel tanks, fuel lines and carburetors could get mixed in with the fresh fuel and cause the intake valves to get stuck. If the intake valves do become stuck, then the heads will need to come off for repairs.
While you are at it, remove the valve covers and inspect the valve train. You had already crank the engine over, so checking to make sure you do not have any bent push rods (from a possible stuck valve(s)). If everything is OK then check the valve clearances. Then close up the valve covers. |
#6
|
|||
|
|||
Re: Looking for information on 1960-1965 7000 series
Thanks for the info. Ed, you are correct about the year. I never noticed the direction of the pillar before. Based on my serial number, it appears to be a 60 or 61, it appears that they used the letter N for both those years.
Thanks for the links James, I think I will have to grab those manuals. At this point, the air system, and the wiring is a mess, so hopefully they have some info on that stuff in the on of those books. |
#7
|
|||
|
|||
Re: Looking for information on 1960-1965 7000 series
Did you find the Parts id Plate on the glove box door. This plate will tell you all the important info on the truck.
The B7000 N model ran from 1960-1963 and had four series. The first number after the N is the series number. The series number will tell you the year Ex 1=1960,2=1961,3=1962 and 4=1963. eBay has the 1960 GMC MODELS 5500-9000 FACTORY SERVICE MANUAL (X-6034) for $13.99. that manual will cover the first two series 60-61. X-6034 https://www.ebay.com/itm/36429109921...Bk9SR9Lfuam5ZA Depending on the year of your truck, you might need one or both supplement manuals X-6234 (1962) and X-6334 (1963). X-6234 https://www.ebay.com/itm/19636602075...Bk9SR5zs76i5ZA X-6334 https://www.ebay.com/itm/39276868023...Bk9SR5zs76i5ZA . Parts id Plate |
The Following User Says Thank You to gmcjuniorvan For This Useful Post: | ||
Funky61 (September 8th, 2024) |
Bookmarks |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Re: 1960 GMC L-7000 | Archiver | Previous Forum Posts | 0 | October 31st, 2006 03:14 AM |
RE: [6066 GMC] 1960 GMC L-7000 | Archiver | Previous Forum Posts | 0 | October 30th, 2006 12:34 AM |
1960 GMC L-7000 | Archiver | Previous Forum Posts | 0 | October 29th, 2006 02:25 AM |
Re: [6066 GMC] 1960 GMC L-7000 | Archiver | Previous Forum Posts | 0 | October 29th, 2006 01:40 AM |
Re: [6066 GMC] 1960 GMC L-7000 | Archiver | Previous Forum Posts | 0 | October 29th, 2006 01:38 AM |