6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > GMC V6 and V12 Engines


GMC V6 and V12 Engines Engine repair and rebuilding

Reply
 
Thread Tools
  #1  
Old March 5th, 2013, 04:14 AM
Clarke Clarke is offline
Senior Member
 
Join Date: Jan 2013
Location: Eureka Springs, AR
Truck: 1962 1500 Wideside 4 speed (305D / SM-420)
Posts: 217
Rep Power: 128
Clarke is on a distinguished road
Default Starter/Flywheel Ring Gear Replacement

Hello to the Group,

For several years my starter/flywheel ring gear has been grinding about every third or forth time I start it; of course, it's been getting worse. Very cool sound when people are checking out your truck when you're leaving a busy parking lot.

Anyway, with all the snow we've gotten here in flat Kansas I started suffering from cabin fever, so I went out in the garage over the weekend and before I knew it, the flywheel was sitting on my bench.

The new ring gear I got from LMC is the wrong diameter (14"). Mine old one is 16" diameter. I was calling around town today and I'm having a difficult time finding a replacement; although, a local guy can order one that is 191 tooth count, but it's shown for a V8. I think this could be a mistake. I counted mine and it is 191 and has a number stamped on it, 2369440.

Can anyone verify they have replaced the same one and provide recommendations to locate one.

Thanks in advance!

David
Reply With Quote
  #2  
Old March 5th, 2013, 05:07 AM
bigblockv6 bigblockv6 is offline
Senior Member
 
Join Date: Jan 2013
Location: Rohnert Park, ca.
Truck: 1968 KM2500
Posts: 1,325
Rep Power: 415
bigblockv6 will become famous soon enoughbigblockv6 will become famous soon enough
Default Re: Starter/Flywheel Ring Gear Replacement

David, what you need for a replacement is the ring gear that was used on GM light duty trucks through out the 80's with the 6.2 GM Diesel. When I had to get a custom built flywheel for my 478M that was going in my K-2500 Tilton Engineering built me a flywheel to the same dimensions as my 305 version with the exception of 8 bolt mating pattern to the crankshaft. They used the 6.2 Diesel ring gear, it is 16 inches in diameter with the same tooth count. I can tell you as of just two weeks ago it is working just fine. LMC is most likely clueless of the existence GMC V6 engine specially in pickup trucks. This is the type of part that you'll need to get from the dealer or at a NAPA auto parts. Pete Chronis Northern Cal 68 GMC KM-2500, 478M V6
Reply With Quote
  #3  
Old March 5th, 2013, 05:26 AM
raycow raycow is offline
Senior Member
 
Join Date: Jan 2013
Location: San Francisco, CA
Truck: 1960 C-10 Short Fleet
Posts: 129
Rep Power: 102
raycow is on a distinguished road
Default Re: Starter/Flywheel Ring Gear Replacement

I believe this is the same gear.

http://www.oreillyauto.com/site/c/de...2275&ppt=C0338

While you are in there, it might be a good idea to replace the starter drive too, or at least inspect it carefully for wear or damage.

Ray
Reply With Quote
  #4  
Old March 6th, 2013, 02:12 AM
Clarke Clarke is offline
Senior Member
 
Join Date: Jan 2013
Location: Eureka Springs, AR
Truck: 1962 1500 Wideside 4 speed (305D / SM-420)
Posts: 217
Rep Power: 128
Clarke is on a distinguished road
Default Re: Starter/Flywheel Ring Gear Replacement

Thank you guys! I checked with both of these places yesterday and they couldn't help me. Now I have the ammo to go back.

Thanks again.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: [6066 GMC] Flywheel / Ring Gear Archiver Previous Forum Posts 0 February 9th, 2008 04:13 AM
Flywheel / Ring Gear Archiver Previous Forum Posts 0 February 9th, 2008 02:35 AM
Re: [6066 GMC] Flywheel / Ring Gear Archiver Previous Forum Posts 0 February 9th, 2008 02:20 AM
Re: Flywheel / Ring Gear Archiver Previous Forum Posts 0 February 9th, 2008 12:02 AM
702 Flywheel-starter combo? Archiver Previous Forum Posts 0 October 6th, 2007 01:19 AM


All times are GMT +1. The time now is 04:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710428402|0