![]() |
![]() |
|
General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here. |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
![]()
Hi, so Ive been hunting for a 60-63 gmc and Im just about to nab a 62 c4000 dump for $2k.(intro, u can skip to next paragraph if ur not interested in why) Ive done some research about this generation of truck because it seems very utilitarian and thats exactly what im looking for. I plan on using this truck to make some cash in the spring, and at worst ill be able to get more familiar with these trucks.
She runs, drives, and dumps, but needs a master cylinder before i think about taking her on the road. Plus i dont appear to have any lights besides my left headlight, and probably needs a carb rebuild. Anyways, what do you guys think? Did i get a good deal? I plan on using her as a work truck till i can afford something i would let an employee drive. What should i watch for? can i get away with just replacing the master cylinder? or should i replace everything? IMG_0086.jpeg IMG_0075.jpeg |
#2
|
||||
|
||||
![]()
Welcome, yes you seemed to have gotten a good deal. The headlight could be as simple as being burned out, use a multimeter to test the bulbs. The master cylinder is a good first step, but purge the brake lines as well, lord only know is the fluid (if any) is gummed up. MAKE DARN sure you have a proper rated jack, she much heavier than out standard trucks.
Seal the carb well (double bag and plastic wrap) give the engine a good spray down on degreaser and let soak for a few hours then use a pressure washer (hot water washer if you can find one), you'll find a jewel under the all the dirt and grease. THe spark plus they are on the intake side and deep-well design, so make very sure you blow ALL the water out. Before trying to drive, change the engine oil, and filter if you have that option. 1 step at a time and you'll be rolling soon, congrats. Jake Groby Lacombe, LA. |
The Following User Says Thank You to jbgroby For This Useful Post: | ||
PrepperGeek (October 15th, 2024) |
#3
|
|||
|
|||
![]()
Ah Thank you, I really appreciate the input here, I plan on purging the brake lines, after I replace the master cylinder, but my luck with bleeders on old trucks has not been very kind, so I plan on soaking all of the fittings in pb blaster for some time.
For the oil change, I see this truck uses a cartridge/ canister type filter, and I cant seem to get any links to part numbers or in stock listings, Im going to my local Napa store today to see if they have it, but if that fails, where else? Also, what oil should I use? do i run it on the old sae stuff or should I put a more ‘modern’ 10w30 type oil? I have a cheap harbor freight 12 ton bottle jack with me in my pickup, will that suffice for this truck? And I appear to have a broken stud on the front right wheel, where can i find a replacement hub or stud, and how important is it for driving the truck without a load? And I have no clue where to start if i need new soft lines or brake cylinders. Again, I really appreciate being on a forum like this, especially for such an oddball truck from a time that has long since passed, And I am grateful for any future responses and advice. |
#4
|
||||
|
||||
![]()
Welcome PrepperGreek!
Nice truck you have there. Here is the link to oil filter numbers. It depends if you need the one- or two-quart canister. https://6066gmcguy.com/partnumbers.html I also noticed your master cylinder has an extra brake line added?!
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
The Following User Says Thank You to Funky61 For This Useful Post: | ||
PrepperGeek (October 15th, 2024) |
#5
|
|||
|
|||
![]()
Welcome PrepperGreek!
The first thing I would do, buy a 1962 maintenance manual. Not the supplement manual. https://classicparts.com/1962-shop-manual-gmc On the inside of the glove box door is a Parts ID plate. This will list all the major components of the truck (axles, trans and so on). The truck has Vacuum hydraulic brakes, that is what the extra port on the master cylinder is for. As for the brake cylinders you will need to know what axles the truck has, front and rear from the ID plate. Last edited by gmcjuniorvan; October 15th, 2024 at 05:02 PM. |
The Following 3 Users Say Thank You to gmcjuniorvan For This Useful Post: | ||
#6
|
|||
|
|||
![]()
Ah thank you for those links, Those will come in handy very soon, especially the maintenance manual. I will keep posted.
|
#7
|
||||
|
||||
![]()
Dang that's a good deal! I'd snatch that up, fill the back with water, and haul kids around all day in the summer sun! Nice truck!
Headlights are dirt cheap. Just pick one up for maybe $12 and put it in. If you need to test the lights, just move the one that works over to each of the others and see if it comes on. If it does, wiring's fine! Also I noticed your username, is this with thoughts of EMP in mind? That's one of the reasons I picked up Cecilia for originally. I want to be able to get work and light traveling done if things get hairy. ![]()
__________________
Step by steps: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Some people are like slinkys. Not worth much but funny as heck when pushed down stairs. __________________ If the women don't find you handsome, they should at least find you handy. |
#8
|
|||
|
|||
![]()
Partially, but mostly because it was the cheapest running dump truck in my area that wasnt rotted out. I also love the utilitarian design of the gmc v6s, and of older more work centric trucks. I like the simplicity and durability that comes with it, as well as the low price compared to these almost useless modern pickups.
But yeah, I see the advantage of having this truck in a shtf situation. |
#9
|
|||
|
|||
![]()
So, i backed out of buying this truck, its a death by a thousand cuts, the wiring is shot, the cab below the door handles have been patched a million times, theres an insane amount of bondo. The truck needs the brakes bled carb cleaned, new tires, rims(rh5s), is missing the keys for the doors. It does have a good engine, transmission, brake system(has air in it though), hydraulics, suspension, frame, upper cab, dump bed, steer box, and other basic things. If you want it, hes in oorsville, and I have his phone number
|
#10
|
||||
|
||||
![]() Quote:
Wish I had a farm and the space because she'd be in my front yard.
__________________
Step by steps: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Some people are like slinkys. Not worth much but funny as heck when pushed down stairs. __________________ If the women don't find you handsome, they should at least find you handy. |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Re: [6066 GMC] Introduce myself | Archiver | Previous Forum Posts | 0 | November 20th, 2007 02:14 AM |
RE: [6066 GMC] Introduce myself | Archiver | Previous Forum Posts | 0 | November 6th, 2007 01:29 AM |
Introduce myself | Archiver | Previous Forum Posts | 0 | November 5th, 2007 04:03 AM |
HI Just want to introduce myself | Archiver | Previous Forum Posts | 0 | April 16th, 2003 01:43 AM |
Introduce self. | Archiver | Previous Forum Posts | 0 | January 21st, 2001 06:12 AM |