6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Wheels, Tires, Suspension and Brakes
#Sponsored

Wheels, Tires, Suspension and Brakes Keep them doggies rollin', rawhide

Reply
 
Thread Tools
  #1  
Old December 8th, 2022, 04:30 PM
cpc63gmc cpc63gmc is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Rochelle, IL
Truck: 1963 1500
Age: 65
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
cpc63gmc is on a distinguished road
Default Replacement Wheels for 1963 GMC 1500

Hi all,

I've been a member of this group for many years but haven't posted in a long time. I own my grandparents' 1963 GMC 1500 fleetside longbed with the original 305 V-6. It sat in the garage on jackstands for 20 years. I retired at the start of 2022 and have been having it restored this year. I intend to start a thread under builds and show some pictures.

I know this has been discussed some before, but I want to ask thoughts again about wheels. This truck has 15" two piece wheels that replaced the original three piece ones after the GM recall in the 70's. It has 7.00 x 15 bias 8 ply tires.

I'm thinking of switching to a modern wheel since it's hard to find folks to work on these, and it also would be nice to run radials if possible. I don't have the wheel caps for the original wheels and those are tough to find anyway.

Any input on what OEM look type wheels fit this truck? I was thinking maybe 16" as more tires are available. The current wheels are up at the shop where it's being worked on so I can't measure - are these 8 x 6.5 bolt pattern? How about backspacing? Hub diameter?

I've looked at these as options - would like to know if anyone has experience with these or better options.

Thanks for any advice,

Chris

https://www.uswheel.com/wheel/7637/u...9/?finishID=12

https://www.wheelvintiques.com/all-w...ack-8-lug.html
Reply With Quote
  #2  
Old December 9th, 2022, 06:35 PM
Funky61's Avatar
Funky61 Funky61 is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Corona, CA
Truck: 1961 Suburban 1962 GMC Utility
Posts: 1,164
Thanks: 7
Thanked 7 Times in 4 Posts
Rep Power: 421
Funky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really nice
Default Re: Replacement Wheels for 1963 GMC 1500

I used to have a 70 GMC with the 16.5" steel wheels. Tires were a challenge to find so I used steel wheels from a 72 to 87 GM truck. I think they were 16 x 6. Those are out there you just have to be patient.

I also bought a set of Ford Accuride's that came on the late Trucks and Vans and those are 16 x 7 with 4" back spacing but they are not hub centric and yet many others use them. They also have the nubs for a hubcap should you decide to use one

I found this one available on Rock auto which is a refurbished unit for a 1993 G30 Van, and it is hub centric

https://www.rockauto.com/en/moreinfo...t=7644&jsn=892
__________________
1961 GMC Suburban 305A Overdrive
1962 GMC Utility 305D
Reply With Quote
  #3  
Old December 10th, 2022, 04:47 PM
cpc63gmc cpc63gmc is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Rochelle, IL
Truck: 1963 1500
Age: 65
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
cpc63gmc is on a distinguished road
Default Re: Replacement Wheels for 1963 GMC 1500

Thanks for that info. I've seen another posting somewhere once where someone mentioned those Ford Accuride wheels. I'll check those out for sure. Sounds like a good option.

I'd be curious if anyone thinks those two wheel types I linked will work, and if not, why not?
Reply With Quote
  #4  
Old January 10th, 2023, 01:55 AM
EBasil EBasil is offline
Junior Member
 
Join Date: Feb 2021
Location: San Diego, California
Truck: 1964 Fleetside PU 1500
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 28
EBasil is on a distinguished road
Default Re: Replacement Wheels for 1963 GMC 1500

Good grief those steelies other than the Rock Auto items are Expensive!

I need to put a set on my '64 this year. I am running the recall-offer split rims and the Lucas Super Traxion bias plies that look great but are loud and won't be long-lived. I would like the least-expensive but HD steelies I can put some truck radials on, so Rock Auto may be the deal. That and a rattle-can or two...
Reply With Quote
Reply

Bookmarks

Tags
tires, wheels

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: [6066 GMC] Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside Archiver Previous Forum Posts 0 August 9th, 2010 01:19 AM
Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside Archiver Previous Forum Posts 0 August 8th, 2010 01:36 AM
Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside Archiver Previous Forum Posts 0 July 12th, 2010 02:55 AM
Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside Archiver Previous Forum Posts 0 July 12th, 2010 01:34 AM
OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside Archiver Previous Forum Posts 0 July 11th, 2010 01:42 AM


All times are GMT +1. The time now is 06:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 791727972101|1726854661|0