Pay Dues or become a Site Supporter |
|
Wheels, Tires, Suspension and Brakes Keep them doggies rollin', rawhide |
|
Thread Tools |
#1
|
||||
|
||||
Need 4x4 front brake hose Part Number
Purchased what O'Reillys said. No good. The wheel cylinder end is wrong size. I may have to change the plumbing from orig to get a hose that has a 3/8-24 male end for the cylinder. Any help appreciated.
|
#2
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Found that the 3/4T wheel cylinder inlet is 7/16-20 which matches the hose. Will try to use those. The mounting pattern is different for the 3/4T cylinder and the bore is 1 1/8" instead of 1". Will see if it physically fits, if so will drill backing plate to accommodate mounting unless someone chimes in and tells me I'm crazy.
Last edited by AZKen; March 1st, 2016 at 09:32 PM. |
#3
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
OK , I know I'm talking to myself here, but to close this issue, I drilled and tapped the wheel cylinders to accept the hose.
|
#4
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Azken, I looked up the part number as 3773168.
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
#5
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Thank you Funky. From what I can find online re that number, that hose won't work for me. I was hoping there was a hose that would fit right on. The correct length hose with the correct frame end, but incorrect wheel cylinder end, is BrakeBest BH34466 @ O'Reilly. The correct wheel cylinder is WC14205 / WC14206. The inlet on the wheel cylinder is 3/8-24 but the hose end is 7/16-20. Fortunately it is SAE and the 3/8-24 can be drilled out (13/32) and retapped with a normal tap, to 7/16-20. Notice the "frame" end of the hose has male AND female threads. This is necessary for the original fitting/retainer/banjo to work, both front hoses are the same. This is for the front of 1960 K1000. This truck, being "first year", has some one or two year only ideas, the parts stores don't know anything about GMC and I found these parts by searching 1960 Chevrolet K10. All is good now. Maybe someday someone will find this thread and it will help them sort it out.
Last edited by AZKen; March 2nd, 2016 at 06:33 AM. |
#6
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
DSC00986.JPG
DSC00988.JPG DSC00992.JPG DSC00993.JPG DSC00995.JPGHere are some pics of the semi finished brake plumbing, The fitting going into the front wheel cylinder is where the problem was. Last edited by AZKen; March 4th, 2016 at 12:23 AM. |
#7
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Pictures missing
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
#8
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Rebooted. OK now?
|
#9
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Yes Sir!
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
#10
|
||||
|
||||
Re: Need 4x4 front brake hose Part Number
Looks Great AZken! Are the hard lines from a kit (Inline Tube etc)?
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
Bookmarks |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Genral Motors brake part number/ picture needed | Wizard2467 | Wheels, Tires, Suspension and Brakes | 0 | June 20th, 2013 10:49 PM |
Good Part Number for Brake Light Switch | Archiver | Previous Forum Posts | 6 | March 16th, 2011 01:40 AM |
Re: front engine mount part number | Archiver | Previous Forum Posts | 0 | June 1st, 2007 03:14 AM |
front engine mount part number | Archiver | Previous Forum Posts | 0 | May 31st, 2007 01:53 AM |
Re: [6066 GMC] front engine mount part number | Archiver | Previous Forum Posts | 0 | May 31st, 2007 01:53 AM |