6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Builds and Journals


Builds and Journals This is where the magic happens. Photograph & document your GMC build progress for posterity.
NOTICE - Photobucket will delete your pics after a time. Use another host if possible.

Reply
 
Thread Tools
  #31  
Old March 23rd, 2020, 04:00 AM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Quarantined to the garage the last few days, decided to start working on the back 1/2 since the bed is off.
The frame will get degreased and cleaned,primed and painted. The spicer rear gets new front yoke seal, 2 piece drive shaft gets new ujoints and center carrier bearing assembly, new shocks, wheel cylinders rebuilt and new shackle and leaf spring bushings. I will be replacing the brake hard lines too.
Attached Images
File Type: jpg IMG_2360.JPG (3.29 MB, Multiple views, 6 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump

Last edited by tbucketnut; March 23rd, 2020 at 04:07 AM.
Reply With Quote
  #32  
Old April 5th, 2020, 12:16 AM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Wrapped up the back 1/2 today. Waiting for my bed wood kit to arrive with all new hardware probably in the next two weeks or so, it is coming the slow way freight. Really pleased on how it all went back together. With these tough times going on right now, it is easy for me to just go out in the shop and lose a day or week or two. The positive thing is the sales have gone on some of these special expensive parts and was able to take advantage of that. Was happy to pay extra to MAR-K and buy American.
Attached Images
File Type: jpg IMG_2391.JPG (3.30 MB, Multiple views, 14 clicks)
File Type: jpg IMG_2390.JPG (4.15 MB, Multiple views, 12 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #33  
Old April 10th, 2020, 06:39 PM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Decided to start on the bedsides today, Will do some cleaning up on the insides then some sanding. Managed to glass bead the rear bumper brackets and get them ready for paint. Hope a lot of you can get some garage time in while this COVID19 is still running around.

Stay safe out there,
Steve
Attached Images
File Type: jpg IMG_0156.jpg (52.1 KB, Multiple views, 4 clicks)
File Type: jpg IMG_0155.jpg (52.0 KB, Multiple views, 7 clicks)
File Type: jpg IMG_0154.jpg (50.6 KB, Multiple views, 5 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #34  
Old May 2nd, 2020, 12:33 AM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Been working on the bed sides and front panel and tail gate. Stripping and doing hammer and dolly and body work. Not a lot of dents this bed was very well cared for over the years. Somebody had coated the bed sides inside of tailgate and front bed panel with bedliner. This stuff really preserved the condition of the parts but it is an absolute bear to strip off. To do it right it would have to be chemically stripped I feel but I plan on recoating the bedsides and front panel inside tailgate with bedliner again so no need to take it all the way down.

This truck has had at least two canopies on it over the years as evidence to the 11 holes in each bedside top rail. I ended up mig welding up the holes, which means I have to repaint the bedsides now. So since it is getting repainted I'm changing the color and shooting the entire truck in a different color. There are a couple places I want to check to see if there is any corrosion anyway like the bottom of the front fenders and front of the doors. So this seemingly easy bed wood replacement has turned into a complete truck re do.
Attached Images
File Type: jpg IMG_2341.jpg (51.8 KB, Multiple views, 6 clicks)
File Type: jpg IMG_2396.jpg (51.1 KB, Multiple views, 5 clicks)
File Type: jpg IMG_2399.jpg (40.3 KB, Multiple views, 8 clicks)
File Type: jpg IMG_2400.jpg (35.4 KB, Multiple views, 5 clicks)
File Type: jpg IMG_2404.jpg (58.6 KB, Multiple views, 8 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #35  
Old May 2nd, 2020, 12:49 AM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Well one thing leads to another. I absolutely hate needless drilled holes and abandoned drilled holes in the interior of the truck. The rear inside cab panel had 10 holes in it where somebody had installed two different gun racks in it. I have nothing against gun racks and would of kept it if it was still on the truck but the only thing left were the evidence of discarded drilled holes. So I planned on filling these holes and re-shooting the interior in the correct color. Somebody repainted it gold and I just cant take that color.

Again one thing leads to another, I decide to make a panoramic rear window now so I'll be cutting up the outer sheet metal and replacing the inner cab back panel, at least I dont have to weld up the holes now. Always preferred the big windows over the small back window trucks anyway, since there is a well fitting panel being made now, meaning I dont need to hunt down a donor truck. I decided now was the time/. So with shipping the back panel was 5 bills delivered to my door plus I have to buy new glass and weather stripping. I've been saving so much money being quarantined and all, might as well feed my habit this way.

More to come
Attached Images
File Type: jpg IMG_0176.JPG (1.13 MB, Multiple views, 9 clicks)
File Type: jpg IMG_0177.JPG (1,020.7 KB, Multiple views, 9 clicks)
File Type: jpg IMG_0180.JPG (981.0 KB, Multiple views, 8 clicks)
File Type: jpg IMG_0182.JPG (1.04 MB, Multiple views, 9 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #36  
Old May 5th, 2020, 03:31 PM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Spent the good part of the day grinding out spot welds that retain the inner rear window panel. Used a cut off wheel to cut along the top of the panel and around the pinch weld of the small window. It all came out ok. The inside of the roof sheet metal is unprotected and is showing surface rust so I am next going to have to address that.
Attached Images
File Type: jpg IMG_2434.JPG (3.38 MB, Multiple views, 13 clicks)
File Type: jpg IMG_2435.JPG (3.75 MB, Multiple views, 15 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #37  
Old May 11th, 2020, 06:03 PM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Good morning, it has been productive here today. It was a pain to grind out all those factory rivets, but at least that job is done. I still need to clean up the mating surfaces of the inner panel and roof and door pinch welds but it is trial fitted and am very pleased with the fit. For anyone wanting to do this, the panel I used is available from Classic Parts. This is one part that was remanufactured and done right, no surprises and I anticipate it to weld up really good.
Thanks for reading,
Steve
Attached Images
File Type: jpg IMG_0191.jpg (46.7 KB, Multiple views, 15 clicks)
File Type: jpg IMG_0190.jpg (58.0 KB, Multiple views, 14 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #38  
Old February 15th, 2022, 06:39 AM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Hello fellers. Took a good year and 1/2 off. The pandemic hit and I decided to build a bigger shop. I have completely outgrown my 20 by 24 shop. If you can believe it I did a cab off restoration on my 53 Chev 5 window. Even painted it in there. Never again, seems I was spending 1/2 my time moving things in and out to make room to work. My new shop is 24' by 44' with 13' high ceilings. It took me a year and a half to build it, permit process, getting through the material shortages and so on. Then the move over with tools and machinery. I'm feeling my age lately. I'm now officially starting back on the 64 GMC. Pretty stoked. One of the pics shows a sm420 hanging from the chain hoist. I lifted off the transmission jack, done packing around 150lb transmissions.
Steve
Attached Images
File Type: jpg IMG_1178.JPG (841.7 KB, Multiple views, 10 clicks)
File Type: jpg IMG_1296.JPG (769.1 KB, Multiple views, 9 clicks)
File Type: jpg IMG_1297.JPG (784.0 KB, Multiple views, 11 clicks)
File Type: jpg 280.JPG (5.72 MB, Multiple views, 9 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
Reply With Quote
  #39  
Old February 16th, 2022, 01:24 AM
tbucketnut tbucketnut is offline
Senior Member
 
Join Date: Oct 2019
Location: GIG HARBOR, WA
Truck: 64 1/2 ton
Age: 65
Posts: 203
Rep Power: 127
tbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the roughtbucketnut is a jewel in the rough
Default Re: 1964 GMC Model 1002 build journal

Started removing the two front fenders today. I saw some rust bubbles on both the bottoms of the fenders that will need small patches. Interesting crayon marks on the ends of the front support. 720 trim number and cust for custom cab trim on the other. Oakland Assembly Plant.
Attached Images
File Type: jpg IMG_1299.JPG (940.9 KB, Multiple views, 5 clicks)
File Type: jpg IMG_1300.JPG (1.08 MB, Multiple views, 1 clicks)
__________________
Steve Stock
Gig Harbor, Wa

1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration

1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump

Last edited by tbucketnut; February 16th, 2022 at 01:34 AM.
Reply With Quote
  #40  
Old February 16th, 2022, 02:27 PM
duallyjams's Avatar
duallyjams duallyjams is offline
Member
 
Join Date: Jan 2013
Location: Deale
Truck: 64 GMC
Posts: 31
Rep Power: 78
duallyjams is on a distinguished road
Default Re: 1964 GMC Model 1002 build journal

Congrats on the new shop. I know what it's like spending more time moving thing around to make room to work in a small garage.
__________________
63 GMC V6 carryall
64 GMC V6 LWB
66 GMC SWB BBW buddy buckets
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1965 GMC Model 1002 paint Jeannie Previous Forum Posts 1 January 22nd, 2013 01:46 PM
1964 GMC model 1000 and 1965 GMC model 1002 Archiver Previous Forum Posts 0 November 6th, 2012 06:49 AM
1965 GMC model 1002 temeprature gauge on high side, sshroud and drum puller Archiver Previous Forum Posts 0 November 6th, 2012 06:38 AM
1965 GMC model 1002 trcuk for sale. Archiver Previous Forum Posts 5 November 2nd, 2012 06:22 AM
1965 GMC model 1002 gasoline mileage difference by changing rear axle ratio, ecetera. Archiver Previous Forum Posts 0 October 31st, 2012 02:38 AM


All times are GMT +1. The time now is 07:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 671711554703|1710442605|0