6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion
#Sponsored

General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #1  
Old June 13th, 2020, 08:49 PM
zoulas zoulas is offline
Member
 
Join Date: Jun 2017
Location: NY, NY
Truck: 1965
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 55
zoulas is on a distinguished road
Default Brake Issue

Hello again, 1965 GMC Panel 305E

The truck unfortunately sat for a while (my fault.) When to start it today and when I stepped on the brake, the petal sank to the floor with zero pressure. Pumped it 20x, still nothing. Checked master cylinder, empty. Checked for leaks around wheeles, did not see any. Filled the master cylinder with new brake fluid. Pumped the petal 10-15x. I got some resistance but not quite normal. Waited few minutes, the petal sank to the floor again with no resistance.

If I repeat the process I get some resistance but it goes away after few seconds. When I pump it and the resistance builds, if I hold the petal , it keeps the resistance. It's only when I release the petal that the resistance goes away.

I checked for leaks again around the wheeles and did not see any. I checked the master cylinder again and it was full, no fluid loss.

Any ideas?

Thanks in advance.
Reply With Quote
  #2  
Old June 13th, 2020, 10:50 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 134
jagarra is on a distinguished road
Default Re: Brake Issue

You have air in the system, it will have to be bled to remove air. Get a friend to pump the brakes up and start with the wheel furthest from Master, rt rear. Do them in order at least twice.
Since you checked wheel cylinders for leakage, check master to see if it's not leaking, I've had extremely slow weeping on them before.
Reply With Quote
  #3  
Old June 14th, 2020, 05:14 PM
zoulas zoulas is offline
Member
 
Join Date: Jun 2017
Location: NY, NY
Truck: 1965
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 55
zoulas is on a distinguished road
Default Re: Brake Issue

Thanks, is there any web inks you can point me to? Possibly a video? Thank you
Reply With Quote
  #4  
Old June 14th, 2020, 09:16 PM
AZKen's Avatar
AZKen AZKen is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,647
Thanks: 0
Thanked 3 Times in 3 Posts
Rep Power: 527
AZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really nice
Default Re: Brake Issue

In google, type in: how to bleed brakes

You may also have a worn out master cylinder.

Last edited by AZKen; June 14th, 2020 at 10:35 PM.
Reply With Quote
  #5  
Old June 16th, 2020, 11:24 PM
zoulas zoulas is offline
Member
 
Join Date: Jun 2017
Location: NY, NY
Truck: 1965
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 55
zoulas is on a distinguished road
Default Re: Brake Issue

If I wanted to get another master cylinder, is there a part number? Is it still made?
Reply With Quote
  #6  
Old June 16th, 2020, 11:43 PM
Funky61's Avatar
Funky61 Funky61 is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Corona, CA
Truck: 1961 Suburban 1962 GMC Utility
Posts: 1,167
Thanks: 11
Thanked 8 Times in 5 Posts
Rep Power: 421
Funky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really nice
Default Re: Brake Issue

Which style do you have?

https://www.rockauto.com/en/catalog/...+cylinder,1836
__________________
1961 GMC Suburban 305A Overdrive
1962 GMC Utility 305D
Reply With Quote
  #7  
Old June 17th, 2020, 09:30 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 78
Posts: 250
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 134
jagarra is on a distinguished road
Default Re: Brake Issue

My local NAPA store listed the master (dual with clutch and brake) as well as rebuild kits.
Reply With Quote
  #8  
Old June 18th, 2020, 12:46 AM
AZKen's Avatar
AZKen AZKen is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,647
Thanks: 0
Thanked 3 Times in 3 Posts
Rep Power: 527
AZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really nice
Default Re: Brake Issue

He should have the mechanical clutch and use a single reservoir master.
CLICK
Reply With Quote
  #9  
Old June 20th, 2020, 09:13 PM
zoulas zoulas is offline
Member
 
Join Date: Jun 2017
Location: NY, NY
Truck: 1965
Posts: 35
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 55
zoulas is on a distinguished road
Default Re: Brake Issue

Would something like this work to bleed the brakes:


ARES 70923-1-Liter Vacuum Brake Fluid Bleeder - Hanging Hook and Locking Trigger Allows for Hands Free Operation https://www.amazon.com/dp/B07CP1YLDF..._89L7EbSKG5HGP
Reply With Quote
  #10  
Old June 21st, 2020, 01:55 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: Brake Issue

You really don't need a gadget to bleed the brakes. Just open the valve and have a buddy mash the pedal repeatedly. It only takes a few times until there's no air coming out, then you're good to go. Catch the fluid in a can as it squirts out and re-add it to the system so you don't waste any. Or let it blow out on the ground if you have a lot and don't want grass there for the rest of the season
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brake light issue surfamtn Interiors, Dash, Lights and Electrical 6 January 18th, 2016 07:04 PM
Parking brake issue HELP! tatastruck Wheels, Tires, Suspension and Brakes 4 March 28th, 2014 03:26 PM
Just getting started! Brake light issue Archiver Previous Forum Posts 17 May 31st, 2012 08:45 AM
four wheel disk brake proportioning valve issue resolved Archiver Previous Forum Posts 0 January 30th, 2006 01:44 AM
Wheel/brake drum issue Archiver Previous Forum Posts 0 May 18th, 2003 06:02 AM


All times are GMT +1. The time now is 01:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 931731597221|1730552307|0