6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion


General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #1  
Old October 19th, 2016, 02:57 AM
HOTRODJOHN HOTRODJOHN is offline
Senior Member
 
Join Date: Apr 2014
Location: Henderson, Nevada
Truck: 1964 GMC PICKUP, 1956 PONTIAC SAFARI, 1949 CADDY SEDANETTE
Age: 75
Posts: 179
Rep Power: 106
HOTRODJOHN is on a distinguished road
Default New p/s & a/c bracket

Here are photos of the brackets for A/C & P/S. I wanted to get them both done at the same time. The Alternator is using the Factory set-up. The Compressor & P/S can be used together or on their own. The Alternator uses the groove closest to the balancer and the Compressor & P/S can use either the second or third groove. There will be enough adjustment on the Compressor bracket to use either groove. Also, the P/S will come with 2 spacers to enable you to use both grooves on the pulley. I am also sorting out the possibilities of aftermarket pulleys in case you don't have the proper ones. Please any feedback is greatly appreciated. Hopefully, the next time I post everything will be available. This final process will take about 3 weeks according to the laser cutter. I think that it may need and idler pulley if we cannot find a source for a triple groove pulley for the balancer. I will figure it out when I have the system on the running engine. John
Attached Images
File Type: jpg PHONE PHOTOS 10-18-2016 005.jpg (2.24 MB, Multiple views, 46 clicks)
File Type: jpg PHONE PHOTOS 10-18-2016 008.jpg (4.27 MB, Multiple views, 37 clicks)
File Type: jpg PHONE PHOTOS 10-18-2016 009.jpg (2.33 MB, Multiple views, 28 clicks)
Reply With Quote
  #2  
Old October 19th, 2016, 04:48 PM
TJ's GMC's Avatar
TJ's GMC TJ's GMC is offline
Senior Member
 
Join Date: Mar 2015
Location: Cave Junction, Oregon
Truck: 1964 GMC 1500 LWB Wideside 305E V6.
Posts: 1,341
Rep Power: 399
TJ's GMC is on a distinguished road
Default Re: New p/s & a/c bracket

Very nice! One thing, will that P/S bracket work with the original style P/s Pump?

http://thumbs.ebaystatic.com/images/...zQ5/s-l225.jpg
__________________
"Excuse the rust I use my truck"
1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1964 Chevy C20 292/SM420
1966 Chevy C10 292 hotrod 6/TKO600


My youtube channel aka Military Chevy:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old October 20th, 2016, 12:47 AM
GTS61 GTS61 is offline
Senior Member
 
Join Date: Jul 2014
Location: Jacksonville, Fl.
Truck: 1961 Stepside-305 V6
Age: 62
Posts: 161
Rep Power: 101
GTS61 is on a distinguished road
Default Re: New p/s & a/c bracket

Wow John looking good! Sure appreciate all the time you have put into this project. Talk to you in about 3 weeks.
Reply With Quote
  #4  
Old October 20th, 2016, 04:07 AM
HOTRODJOHN HOTRODJOHN is offline
Senior Member
 
Join Date: Apr 2014
Location: Henderson, Nevada
Truck: 1964 GMC PICKUP, 1956 PONTIAC SAFARI, 1949 CADDY SEDANETTE
Age: 75
Posts: 179
Rep Power: 106
HOTRODJOHN is on a distinguished road
Default Re: New p/s & a/c bracket

To be honest with you, I don't know which pump was used. If you can tell me what was on originally or a picture would help. John
Reply With Quote
  #5  
Old October 20th, 2016, 04:12 AM
GTS61 GTS61 is offline
Senior Member
 
Join Date: Jul 2014
Location: Jacksonville, Fl.
Truck: 1961 Stepside-305 V6
Age: 62
Posts: 161
Rep Power: 101
GTS61 is on a distinguished road
Default Re: New p/s & a/c bracket

I don't have original pump but I do have original bracket. It should show it on the pictures I sent you awhile back.
Reply With Quote
  #6  
Old October 20th, 2016, 04:26 AM
HOTRODJOHN HOTRODJOHN is offline
Senior Member
 
Join Date: Apr 2014
Location: Henderson, Nevada
Truck: 1964 GMC PICKUP, 1956 PONTIAC SAFARI, 1949 CADDY SEDANETTE
Age: 75
Posts: 179
Rep Power: 106
HOTRODJOHN is on a distinguished road
Default Re: New p/s & a/c bracket

I will have to check I am not sure if I deleted it. John
Reply With Quote
  #7  
Old October 20th, 2016, 06:10 AM
GTS61 GTS61 is offline
Senior Member
 
Join Date: Jul 2014
Location: Jacksonville, Fl.
Truck: 1961 Stepside-305 V6
Age: 62
Posts: 161
Rep Power: 101
GTS61 is on a distinguished road
Default Re: New p/s & a/c bracket

I sent another picture.
Reply With Quote
  #8  
Old October 20th, 2016, 09:08 PM
TJ's GMC's Avatar
TJ's GMC TJ's GMC is offline
Senior Member
 
Join Date: Mar 2015
Location: Cave Junction, Oregon
Truck: 1964 GMC 1500 LWB Wideside 305E V6.
Posts: 1,341
Rep Power: 399
TJ's GMC is on a distinguished road
Default Re: New p/s & a/c bracket

The pump in the link on the picture is the one like mine....I am assuming that's the original type. loll
__________________
"Excuse the rust I use my truck"
1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1964 Chevy C20 292/SM420
1966 Chevy C10 292 hotrod 6/TKO600


My youtube channel aka Military Chevy:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old October 21st, 2016, 01:58 AM
HOTRODJOHN HOTRODJOHN is offline
Senior Member
 
Join Date: Apr 2014
Location: Henderson, Nevada
Truck: 1964 GMC PICKUP, 1956 PONTIAC SAFARI, 1949 CADDY SEDANETTE
Age: 75
Posts: 179
Rep Power: 106
HOTRODJOHN is on a distinguished road
Default Re: New p/s & a/c bracket

I took that assembly off a 1978 GMC pick-up with a small block. What I am making are 2 rear braces, some spacers and a bolt kit for the pump, to make it easier to install this assembly. Although, I will have some brackets & pumps for anyone who does not want to do the legwork. This pump will enable you to run off the 1st. balancer pulley or the second one, if you have a 3 pulley system. Still working on the hardest part. THE PULLEYS. John
Reply With Quote
  #10  
Old October 21st, 2016, 02:43 PM
ilvracn's Avatar
ilvracn ilvracn is offline
-= Dues Paid =-
 
Join Date: Nov 2013
Location: atlantic iowa
Truck: 1966 gmc 1500
Age: 59
Posts: 215
Rep Power: 123
ilvracn is on a distinguished road
Default Re: New p/s & a/c bracket

Here is a pic of my 66 power steering. The pump, pulleys, and brackets came off of a 305 v-6, do not know what year.
Attached Images
File Type: jpg sign & s-10 pics 016.JPG (874.6 KB, Multiple views, 22 clicks)
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
305 & 351 (not magnum) in R.I. 5spd&pt dthela 1960-1966 GMC Marketplace 1 April 19th, 2015 04:34 AM
Apples & Oranges Clarke Other Rides and Projects 8 April 7th, 2015 03:26 AM
fuel and amp gauge 5500 GMC Interiors, Dash, Lights and Electrical 2 October 7th, 2014 01:57 PM
Stock wheels & hubcaps Archiver Previous Forum Posts 7 April 1st, 2012 01:36 AM
Old Amp Meter and Wiring Archiver Previous Forum Posts 0 July 10th, 2007 03:37 AM


All times are GMT +1. The time now is 11:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710455674|0