6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion


General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #11  
Old March 12th, 2018, 01:40 AM
OdieTN's Avatar
OdieTN OdieTN is offline
Member
 
Join Date: Feb 2018
Location: Memphis, TN
Truck: 1964 1000 P/U 305E
Posts: 31
Rep Power: 47
OdieTN is on a distinguished road
Default Re: New 305v6 fan in TN

Thanks FetchmeaPepsi! I actually ended up re-using the gasket that was sandwiched in between 2 metal gaskets. It looked to be in good shape. Not sure how it works...haven't started it yet. I want to swap the gas out with some non-ethanol with marvels mystery oil 1st. I told Rudy (my son) to be prepared to take the carb back off agajn after we crank her up. Here's some pics of Rudy's 1st carb job - GO TIGERS!
Main setbacks: we forgot the needle keeper. Realized after we were completely done. We lost the BB about 6 times 😂 A pretty fun job...We did not get frustrated 1 time! But we do need to pick up the pace to a little. I think we'll get on a role here quickly.
As you can see I have a cheap adapter and paper air filter. Anybody got an old oil bath filter? I'll post in the trader section also.
I promise I will get this moved to a build thread. I cannot access the site from my laptop via Wi-Fi for some reason. I have to use my phone. I'll get It figured out.
Attached Images
File Type: jpg 20180310_100637.jpg (3.01 MB, Multiple views, 3 clicks)
File Type: jpg 20180310_094336.jpg (4.18 MB, Multiple views, 3 clicks)
File Type: jpg 20180309_222754.jpg (3.03 MB, Multiple views, 3 clicks)
File Type: jpg 20180309_222612.jpg (3.43 MB, Multiple views, 3 clicks)
File Type: jpg 20180303_140043.jpg (3.46 MB, Multiple views, 5 clicks)
File Type: jpg 20180303_135837.jpg (3.98 MB, Multiple views, 7 clicks)
Reply With Quote
  #12  
Old March 14th, 2018, 04:25 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,724
Rep Power: 545
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: New 305v6 fan in TN

Quote:
Originally Posted by OdieTN View Post
Thanks FetchmeaPepsi! I actually ended up re-using the gasket that was sandwiched in between 2 metal gaskets. It looked to be in good shape. Not sure how it works...haven't started it yet. I want to swap the gas out with some non-ethanol with marvels mystery oil 1st. I told Rudy (my son) to be prepared to take the carb back off agajn after we crank her up. Here's some pics of Rudy's 1st carb job - GO TIGERS!
Main setbacks: we forgot the needle keeper. Realized after we were completely done. We lost the BB about 6 times 😂 A pretty fun job...We did not get frustrated 1 time! But we do need to pick up the pace to a little. I think we'll get on a role here quickly.
As you can see I have a cheap adapter and paper air filter. Anybody got an old oil bath filter? I'll post in the trader section also.
I promise I will get this moved to a build thread. I cannot access the site from my laptop via Wi-Fi for some reason. I have to use my phone. I'll get It figured out.

Looks like you guys jumped right in! It's a lot more fun with a helper, ain't it?
Root Beers for all!

Those old oil bath filters are pretty easy to find. I bet if you hit up RustBucket he probably has a dozen laying around. Nobody wants them anymore, but they're my favorite. Talk about cheap upkeep!

Abus has two of em here https://6066gmcclub.com/showthread.php?t=48752 but they're a different style.

Here's one from Lizziemeister https://6066gmcclub.com/showthread.php?t=48653 but it's for a 351. Might fit, you'd have to ask BigBlockv6 on that though. I don't have that kinda experience.

Have fun! You're training future owners there, buddy!
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #13  
Old March 19th, 2018, 04:28 AM
OdieTN's Avatar
OdieTN OdieTN is offline
Member
 
Join Date: Feb 2018
Location: Memphis, TN
Truck: 1964 1000 P/U 305E
Posts: 31
Rep Power: 47
OdieTN is on a distinguished road
Default Re: New 305v6 fan in TN

Thanks for all the info! Yes much more fun with a helper! We got a late start this weekend. Had some yard work and had to change oil in mom and sisters car 1st. Rudy has never helped me change oil before, but he was right there with me today so we could hurry up and start on his truck. Big help because I don't fit under mommas car as good as I used to.

So I got this little transfer pump and drained the tank.

The siphon hose came out with black nastiness all over it. So it was out with the seat and tank.

Sounds like sand sliding around in the bottom of the tank...yuck! We'll try to work on cleaning the tank this week. It will be tough...lots of soccer and basketball this week.

This speeds up need for new seats. I'm going with 04-06 chevy seats for seatbelts and head rests. We've got some floor pan work that we'll come back to. Rudy is anxious to hear it run. So we'll make floor pans a separate project. Double work but it will keep the project more interesting.

I polished on the grill and it came out looking like this: HA this is my 06. I had to mention my 06. I've had it since new and now have 220k miles. And don't forget there is an 06 in the middle of 6066!
Attached Images
File Type: jpg 20180318_182322.jpg (3.91 MB, Multiple views, 5 clicks)
File Type: jpg 20180318_182406.jpg (6.58 MB, Multiple views, 4 clicks)
File Type: jpg 20180318_185045.jpg (3.42 MB, Multiple views, 5 clicks)
File Type: jpg 20180318_182427.jpg (3.88 MB, Multiple views, 4 clicks)
Reply With Quote
  #14  
Old March 19th, 2018, 04:43 AM
bigblockv6 bigblockv6 is offline
Senior Member
 
Join Date: Jan 2013
Location: Rohnert Park, ca.
Truck: 1968 KM2500
Posts: 1,325
Rep Power: 415
bigblockv6 will become famous soon enoughbigblockv6 will become famous soon enough
Default Re: New 305v6 fan in TN

Seems that Lizzimeister's air cleaner is from a 351E with the larger WWC carb so it won't fit the 305E unless you can get one of those plastic adapters.
Reply With Quote
  #15  
Old March 19th, 2018, 11:14 PM
James James is offline
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 432
Rep Power: 199
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: New 305v6 fan in TN

Quote:
Originally Posted by OdieTN View Post
As you can see I have a cheap adapter and paper air filter. Anybody got an old oil bath filter?
I have one you can have. I just need to clean it up enough so it can be shipped. PM me you address and this weekend I will get it sent to you.
Reply With Quote
  #16  
Old March 26th, 2018, 09:45 PM
OdieTN's Avatar
OdieTN OdieTN is offline
Member
 
Join Date: Feb 2018
Location: Memphis, TN
Truck: 1964 1000 P/U 305E
Posts: 31
Rep Power: 47
OdieTN is on a distinguished road
Default Re: New 305v6 fan in TN


Much appreciated James!
Reply With Quote
  #17  
Old April 29th, 2018, 04:26 AM
OdieTN's Avatar
OdieTN OdieTN is offline
Member
 
Join Date: Feb 2018
Location: Memphis, TN
Truck: 1964 1000 P/U 305E
Posts: 31
Rep Power: 47
OdieTN is on a distinguished road
Default Re: New 305v6 fan in TN

Big day today. We got a new gas tank from brothers installed. I ordered sending screws from lmc. We got it all put in today and it cranked right up. After a little fine tuning on the carb she is running like a top! We drove to the end of my cove a few times. I let Rudy drive too! There is no hesitation - it seems to be running great. I also replaced the universal inline filter by the carb. I have no under cab filter so add that to the list! We are really fired up. It's been a while since we've been able to work on it due to soccer, confirmation, prom, etc. Just wanted to give a quick update. Thanks!
Attached Images
File Type: jpg 20180428_130611.jpg (3.18 MB, Multiple views, 6 clicks)
File Type: jpg 20180428_193628.jpg (4.45 MB, Multiple views, 4 clicks)
Reply With Quote
  #18  
Old June 11th, 2018, 05:28 PM
OdieTN's Avatar
OdieTN OdieTN is offline
Member
 
Join Date: Feb 2018
Location: Memphis, TN
Truck: 1964 1000 P/U 305E
Posts: 31
Rep Power: 47
OdieTN is on a distinguished road
Default Re: New 305v6 fan in TN

Hi Everyone, well I don't have any pictures right now, but I wanted to update you that I got a fresh oil change this weekend. I went through the whole "wrong gasket/no gasket" thing, but I was excited to find that my local NAPA has filter 1121 IN STOCK with gasket. Everything went together good and the cannister seemed to be put together correctly. There was quite a bit of sludge in the bottom of the cannister. Upon inspecting the next morning I found no leaks at the cannister or drain plug.
I used NAPA 15W40. The bottle says "contains zinc compound." Not to start another oil debate thread, but I haven't seen much discussion on the NAPA oil, so if there is a reason I should not use it, please chime in. It's $10.99/gallon.
I wanted to change the oil because me and Rudy are probably driving too much just up and down our street, like a couple of kids with a new go kart.
I just got pre-approval to order seat cover and bed wood. I had posted earlier that we were going to use 2003-2006 seats, but we have changed our mind and are sticking with original seat (I'm so glad!). Rudy had a little party at the house and went to show some of the girls his truck. He hopped in the drivers seat and 4 girls piled in through the passenger door. They were squeezed in 5 across the bench. Right after that he said, "Dad, I think I want to keep the bench seat."
Hoping to get valves adjusted this weekend. I'll let you know how it goes. Here's a great video - I'm sure it's one of you guys! https://www.youtube.com/watch?v=dyoTQ0xaLBo
Reply With Quote
  #19  
Old June 11th, 2018, 05:42 PM
LEWISMATKIN's Avatar
LEWISMATKIN LEWISMATKIN is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: RIDGE MANOR, FLORIDA
Truck: 1965 1002 GMC V6-305E
Age: 64
Posts: 307
Rep Power: 173
LEWISMATKIN will become famous soon enoughLEWISMATKIN will become famous soon enoughLEWISMATKIN will become famous soon enough
Default Re: New 305v6 fan in TN

NAPA oil is packaged by Valvoline oil co. It is good oil.
Reply With Quote
  #20  
Old June 21st, 2018, 04:59 PM
OdieTN's Avatar
OdieTN OdieTN is offline
Member
 
Join Date: Feb 2018
Location: Memphis, TN
Truck: 1964 1000 P/U 305E
Posts: 31
Rep Power: 47
OdieTN is on a distinguished road
Default Re: New 305v6 fan in TN

Thanks Lewis.
Bed wood ordered! Pine wood kit from Brothers.
I also need window regulators and vent window seals. While I'm at it, I appear to be missing the felt or sweep at exterior top of the door. Is this called "division bar with felt" part 10 on this link? Thanks
http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=13

Last edited by OdieTN; June 21st, 2018 at 05:56 PM. Reason: typ-o correction
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ardmore Car Show, Ardmore, TN aphaynes General Discussion 5 August 19th, 2015 04:33 AM
Fan and Fan Clutch Question jrmunn General Discussion 1 October 13th, 2013 06:57 PM
Twin 6 - V12 in Bells, TN Archiver Previous Forum Posts 0 January 22nd, 2012 12:06 AM
1961 GMC truck for sale (not mine) in TN...$800 Archiver Previous Forum Posts 3 December 28th, 2010 06:17 AM
Re: 305V6 Distributor Archiver Previous Forum Posts 0 August 29th, 2004 01:29 AM


All times are GMT +1. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710457015|0