6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Interiors, Dash, Lights and Electrical


Interiors, Dash, Lights and Electrical Everything Inside

Reply
 
Thread Tools
  #1  
Old July 7th, 2021, 05:11 PM
thenonoman thenonoman is offline
Junior Member
 
Join Date: May 2020
Location: Russellville, Arkansas
Truck: 1965 C1000
Age: 44
Posts: 17
Rep Power: 13
thenonoman is on a distinguished road
Default More Turn Signal Issues

I was able to cobble together a turn signal switch solution, and thanks for all the advice that led me to not having to buy a $250 NOS switch. Now I am having another issue. The entire turn signal/ring assembly on the top of the column won't stay in place. As far as I can tell, there are only three screws that hold it to the column, but there is no groove/latch/indent etc., that prevents it from rotating on the column. Am I missing something obvious? No pictures because I am not excited about tearing it apart again, especially in an Arkansas summer, but I will if someone has a good idea.
Reply With Quote
  #2  
Old July 7th, 2021, 07:52 PM
AZKen's Avatar
AZKen AZKen is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,262
Rep Power: 390
AZKen is a jewel in the roughAZKen is a jewel in the roughAZKen is a jewel in the roughAZKen is a jewel in the rough
Default Re: More Turn Signal Issues

You seem to have a column shift.....so:
1. You have a shift collar rotates moves as you shift. Retained by one screw that is adjusted for tension.
2. You have a "bell", or turn signal housing, that is held to the column with three tabs. The bell is twisted to lock it on the tabs. Like a bayonet.
3. You have a turn signal switch and a switch cam. The switch cam is held to the switch with one screw and that assembly is held to the bell with three screws.
4. The switch does not rotate. The bell does not rotate.
5. There is a cancelling cam on the bottom of the steering wheel that operates the switch cam.
Anyone can feel free to correct anything above.

We don't know if you have that set-up and if you have installed correctly.
We don't have any pictures.
We don't know what your complaint is or what does and does not work right now.
We need more info and explanation to have any "ideas"
You say "cobbled", does that mean non original or you modified parts or are missing parts????????????

You signature lists your Truck as a C1000, you should fix that.

Last edited by AZKen; July 7th, 2021 at 08:48 PM.
Reply With Quote
  #3  
Old July 7th, 2021, 10:54 PM
lizziemeister'sV6 lizziemeister'sV6 is offline
-= Dues Paid =-
 
Join Date: Aug 2013
Location: Strawberry Point, Iowa
Truck: 1965 Suburban Series 1000 - 351M with mechancal tachometer - PS & PB & 2 speed Pow-R-Flow automatic
Age: 67
Posts: 140
Rep Power: 86
lizziemeister'sV6 is on a distinguished road
Exclamation Re: More Turn Signal Issues

He was in trouble at the word "cobble".
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turn Signal Issue Jmclendon Interiors, Dash, Lights and Electrical 5 September 27th, 2016 08:58 AM
Turn Signal Switch Pete's 64 Interiors, Dash, Lights and Electrical 6 August 4th, 2013 12:41 AM
Turn Signal Problem Archiver Previous Forum Posts 0 November 9th, 2009 12:34 AM
turn signal assy Archiver Previous Forum Posts 0 February 6th, 2002 12:27 AM
More on the turn signal lenses. Archiver Previous Forum Posts 0 January 30th, 2002 01:27 AM


All times are GMT +1. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 851627392671|1626256868|0
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.