6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > General Discussion


General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here.

Reply
 
Thread Tools
  #1  
Old November 3rd, 2021, 11:24 PM
TRybas TRybas is offline
-= Dues Paid =-
 
Join Date: Apr 2020
Location: Croydon, PA
Truck: 1960 GMC Long fleet 4x4
Age: 34
Posts: 43
Rep Power: 25
TRybas is on a distinguished road
Default 60-61 hood hinges

Could someone please confirm these are the correct hinges for a 1960. Nothing appears to be bent but they are binding to the point where I can not close the hood. They move freely when the hood is not attached. Something is twisting when the hood is bolted on. Iíve tried everything. I believe they are original but maybe a previous own was in there before me.
Attached Images
File Type: jpeg F1A9864F-C5A9-45AF-842D-BD3382A9E984.jpeg (2.42 MB, Multiple views, 12 clicks)
File Type: jpeg 6BDE29BC-58A3-4917-B649-1A6C7CF3AEDF.jpeg (3.18 MB, Multiple views, 8 clicks)
Reply With Quote
  #2  
Old November 3rd, 2021, 11:42 PM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1965, 1967
Posts: 718
Rep Power: 247
Ed Snyder will become famous soon enoughEd Snyder will become famous soon enough
Default Re: 60-61 hood hinges

Quote:
Originally Posted by TRybas View Post
Could someone please confirm these are the correct hinges for a 1960. Nothing appears to be bent but they are binding to the point where I can not close the hood. They move freely when the hood is not attached. Something is twisting when the hood is bolted on. Iíve tried everything. I believe they are original but maybe a previous own was in there before me.
I assume you've oiled all the pivot points. I have a similar problem with my '65 Suburban that may have nothing to do with your problem. If I open my hood too far, the linkage actually goes "over center". The only way to close it then is to pull that particular pivot point forward by hand to get it to close again. So I always stop just short of fully open when I lift the hood.
__________________
Ed Snyder
Medford, Oregon
1962 K1000 Suburban 401M & SM420
1965 2500 Suburban 351C & SM420 with Watson overdrive
1967 CM1500 pickup 351E & NP435
Reply With Quote
  #3  
Old November 4th, 2021, 01:34 AM
TRybas TRybas is offline
-= Dues Paid =-
 
Join Date: Apr 2020
Location: Croydon, PA
Truck: 1960 GMC Long fleet 4x4
Age: 34
Posts: 43
Rep Power: 25
TRybas is on a distinguished road
Default Re: 60-61 hood hinges

Yes everything greased. Itís not an issue of hyper extending rather the last 6-8Ē from being closed. Itís smooth the whole way till than. Itís almost as if there should be a second vertical spring on the back of the hinge.
Reply With Quote
  #4  
Old November 4th, 2021, 07:22 AM
AZKen's Avatar
AZKen AZKen is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,301
Rep Power: 402
AZKen is a jewel in the roughAZKen is a jewel in the roughAZKen is a jewel in the roughAZKen is a jewel in the rough
Default Re: 60-61 hood hinges

They are correct. I hope you have the springs hooked correctly and not with a wire. You will have to explain more exactly what is or is not happening. Does the front come down and back stay open or what? Post good pics of hood when "stuck".

Was hood OK before disassembly? Any new parts? Hinge parts?

Last edited by AZKen; November 4th, 2021 at 07:34 AM.
Reply With Quote
  #5  
Old November 4th, 2021, 05:46 PM
Jim A Jim A is offline
Member
 
Join Date: Jan 2013
Location: Potter Valley, CA
Truck: 1960 3/4, 4 spd, stepside
Posts: 74
Rep Power: 73
Jim A is on a distinguished road
Default Re: 60-61 hood hinges

I lubricated all apparent places on my '60 a couple of years ago and have needed a broomstick prop since to avoid concussions.
I does work smoothly, though for years the back needed an extra little push down.
Reply With Quote
  #6  
Old November 5th, 2021, 02:41 PM
TRybas TRybas is offline
-= Dues Paid =-
 
Join Date: Apr 2020
Location: Croydon, PA
Truck: 1960 GMC Long fleet 4x4
Age: 34
Posts: 43
Rep Power: 25
TRybas is on a distinguished road
Default Re: 60-61 hood hinges

No. I am not using wire. I put it on there as a last ditch effort to test a lower spring tension.

I was able to get it after several more hours. Still need to massage the back side down as Jim A. describes.

I ended up bolting a 2x12 across the hinges in the closed position. Cinched down hard to leave an imprint of the hinge than loosened the the board just enough to allow things to rotate; raised the board to the open position and could see the hinges were non-planar.

I reattached the hood twisting the hinges to where it wanted to be when in the fully closed position.

Thanks for the input everyone.
Attached Images
File Type: jpeg 0C323CDF-498A-4F77-AF1F-BAC2E06CD9B2.jpeg (3.39 MB, Multiple views, 8 clicks)
File Type: jpeg 46795DF2-9568-4231-ACE7-A9E7F2E0ED62.jpeg (3.19 MB, Multiple views, 7 clicks)
Reply With Quote
  #7  
Old November 6th, 2021, 07:45 PM
Prowbar Prowbar is offline
Member
 
Join Date: Dec 2020
Location: Friesland, the Netherlands
Truck: 1965 GMC 1500, 305E, SM420
Posts: 74
Rep Power: 30
Prowbar will become famous soon enough
Default Re: 60-61 hood hinges

That is a clean truck!
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
60-61 GMC Hood wanted GMCNUT 1960-1966 GMC Marketplace 0 November 10th, 2020 02:21 PM
Re: '60/61 Hood (sort of) Archiver Previous Forum Posts 0 April 14th, 2008 02:40 AM
Re: '60/61 Hood (sort of) Archiver Previous Forum Posts 0 April 10th, 2008 12:42 PM
'60/61 Hood (sort of) Archiver Previous Forum Posts 0 April 10th, 2008 07:37 AM
hood hinges Archiver Previous Forum Posts 0 May 4th, 2005 04:03 AM


All times are GMT +1. The time now is 11:41 PM.


Powered by vBulletinģ Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 811638110142|1637188900|0
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.