Pay Dues or become a Site Supporter
|
Pay Dues or become a Site Supporter
|
|
|||||||
| General Discussion Sit down and chat with fellow members! Any topics that don't fit other categories goes here. |
 |
|
|
Thread Tools |
|
#1
October 19th, 2016, 03:57 AM
|
|||
|
|||
New p/s & a/c bracket
Here are photos of the brackets for A/C & P/S. I wanted to get them both done at the same time. The Alternator is using the Factory set-up. The Compressor & P/S can be used together or on their own. The Alternator uses the groove closest to the balancer and the Compressor & P/S can use either the second or third groove. There will be enough adjustment on the Compressor bracket to use either groove. Also, the P/S will come with 2 spacers to enable you to use both grooves on the pulley. I am also sorting out the possibilities of aftermarket pulleys in case you don't have the proper ones. Please any feedback is greatly appreciated. Hopefully, the next time I post everything will be available. This final process will take about 3 weeks according to the laser cutter. I think that it may need and idler pulley if we cannot find a source for a triple groove pulley for the balancer. I will figure it out when I have the system on the running engine. John
|
|
#2
October 19th, 2016, 05:48 PM
|
||||
|
||||
|
Re: New p/s & a/c bracket
Very nice! One thing, will that P/S bracket work with the original style P/s Pump?
http://thumbs.ebaystatic.com/images/...zQ5/s-l225.jpg
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
|
#3
October 20th, 2016, 01:47 AM
|
|||
|
|||
|
Re: New p/s & a/c bracket
Wow John looking good! Sure appreciate all the time you have put into this project. Talk to you in about 3 weeks.
|
|
#4
October 20th, 2016, 05:07 AM
|
|||
|
|||
|
Re: New p/s & a/c bracket
To be honest with you, I don't know which pump was used. If you can tell me what was on originally or a picture would help. John
|
|
#5
October 20th, 2016, 05:12 AM
|
|||
|
|||
|
Re: New p/s & a/c bracket
I don't have original pump but I do have original bracket. It should show it on the pictures I sent you awhile back.
|
|
#6
October 20th, 2016, 05:26 AM
|
|||
|
|||
|
Re: New p/s & a/c bracket
I will have to check I am not sure if I deleted it. John
|
|
#8
October 20th, 2016, 10:08 PM
|
||||
|
||||
|
Re: New p/s & a/c bracket
The pump in the link on the picture is the one like mine....I am assuming that's the original type. loll
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
|
#9
October 21st, 2016, 02:58 AM
|
|||
|
|||
|
Re: New p/s & a/c bracket
I took that assembly off a 1978 GMC pick-up with a small block. What I am making are 2 rear braces, some spacers and a bolt kit for the pump, to make it easier to install this assembly. Although, I will have some brackets & pumps for anyone who does not want to do the legwork. This pump will enable you to run off the 1st. balancer pulley or the second one, if you have a 3 pulley system. Still working on the hardest part. THE PULLEYS. John
|
|
#10
October 21st, 2016, 03:43 PM
|
||||
|
||||
|
Re: New p/s & a/c bracket
Here is a pic of my 66 power steering. The pump, pulleys, and brackets came off of a 305 v-6, do not know what year.
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 305 & 351 (not magnum) in R.I. 5spd&pt | dthela | 1960-1966 GMC Marketplace | 1 | April 19th, 2015 05:34 AM |
| Apples & Oranges | Clarke | Other Rides and Projects | 8 | April 7th, 2015 04:26 AM |
| fuel and amp gauge | 5500 GMC | Interiors, Dash, Lights and Electrical | 2 | October 7th, 2014 02:57 PM |
| Stock wheels & hubcaps | Archiver | Previous Forum Posts | 7 | April 1st, 2012 02:36 AM |
| Old Amp Meter and Wiring | Archiver | Previous Forum Posts | 0 | July 10th, 2007 04:37 AM |
