Pay Dues or become a Site Supporter |
|
Exterior, Bodywork, Paint and Glass Beauty is only 4 coats deep... |
|
Thread Tools |
#1
|
||||
|
||||
Correct Windshield Data for 1960 1002
Hello, I have a cracked replacement windshield on my 1960 GMC 1002 pickup truck. I have a line on a Pilkington Glass Co. windshield, in Coke Bottle Green tint, or clear. Does anyone have a known original early production 1960 GMC Windshield? Or some factory code for the etched in markings? I also need there placement and which way they are readable. Were the original windshields truly clear, or as I suspect, did they have the very slightly Coke Bottle green hue. I want to get this as correct as I can to original. My truck was number 1392 built at Pontiac Plant, and was a Custom with the Stainless Trim around windshield. The original owner took delivery at the factory in fall of 1959. He is 91, and is a friend of mine, a WWII vet and a good guy. Heck, he even signed my glove box door once I got it all painted and back together. He ordered the truck with the extra chrome and two-tone paint,Cape Blue and Olympic White. All back to factory spec except for windshield. Help Appreciated.
|
#2
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
Here is one from a February 1960 GMC. Very slight green not as green as the after market. The etching is on the passenger side and in reverse if read from the out side. Here are 2 more very old replacements that are both tinted very much the same.
|
#3
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
That last pic is from the inside.
|
#4
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
Side glass on another 60. March built.
|
#5
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
Forgot pic
|
#6
|
||||
|
||||
Re: Correct Windshield Data for 1960 1002
Thank you, Do you suppose the greenish tint faded away over the years, from some to very little? Also ,can you decode this information,LOF,AS-1,N7 etc.? Is there a date code that tells you this was a Feb. 1960 built windshield, or completed truck? Thanks for the great pictures, most helpful indeed. Greg Mead
|
#7
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
First no I don't think the green has faded. I looked at my 58 impala that spent 45 years garaged near BELLINGHAM WA. Not much sun and a 43.000 mile car. I think the aftermarket green is to green. If you are having the info etched on new glass you want the AS 1 that means front glass. Then match the date code to your side glass. That's the letters to the right of the LOF logo. Its probably is yc or yy some times there is a # following the 2 letters. The first y is for 59.
|
#8
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
One more thing. Dating a truck without a build sheet is not to hard. The fenders are date stamped m/y. Near the hinge mount on the fender well. The engine has lots if casting #'s. Intake has m/d/y on top. Rear end gears and carrier are dated. Trannys have casting dates on the side. Plus the glass markings. If it has the original radio the inspection sticker has the inspector # and m/d/y. These dates usually predate assembly by a few weeks.
|
#9
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
I have a collection of these. These are in the seats. These build sheets and dates on the trucks have given
Me a good idea how to date a truck within a couple of weeks when these are gone. This sheet tells me thetruck was ordered march 29-1965 and was the 7th truck built on aApril 2 1965. |
#10
|
|||
|
|||
Re: Correct Windshield Data for 1960 1002
Sorry for the poor pic. Here is a better one
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1960 1002 Hand Brake Conundrum | 1960HDGMC | Wheels, Tires, Suspension and Brakes | 2 | November 15th, 2014 10:53 PM |
Correct paint for 1960 GMC Tailgate Letters | Archiver | Previous Forum Posts | 4 | October 1st, 2011 01:53 AM |
Engine Data Page | Archiver | Previous Forum Posts | 0 | May 12th, 2009 01:40 AM |
1960 1002 1/2 ton brake booster question. | Archiver | Previous Forum Posts | 0 | August 23rd, 2008 01:17 AM |
Drive Axle data | Archiver | Previous Forum Posts | 0 | August 6th, 2003 05:50 AM |