Pay Dues or become a Site Supporter |
|
Wheels, Tires, Suspension and Brakes Keep them doggies rollin', rawhide |
|
Thread Tools |
#1
|
||||
|
||||
4x4 Wheels
Hello all,
I recently bought a 65 GMC Suburban 4x4 and would like to find some 16 x 7" 6 lug steel wheels with nubs that will work. I believe I should be looking for GMC or Chevy steel wheels from the 1970s? I've been searching craigslist locally, but the 16" steel wheels (I think from the late 80s and 90s) I've been finding don't appear to have a large enough centers for my hubs. I would think these 16" steel wheels would be readily available, especially at junkyards, but I am having trouble finding them. Any advice on what I should be looking for is much appreciated! Thank you, Ken |
#2
|
||||
|
||||
Re: 4x4 Wheels
Hello Ken, just to be a wise guy, I will say: Look for wheels that have a 6 on 5 1/2 pattern and a center hole that works. Most are 3.5 + diameter. I have a 60 4x4 and have not found any wheels that don't fit. Decide what diameter center hole you need and when searching craigslist, ask for that measurement. Fortunately our wheels are lug-centric.
When you say "don't appear" it makes me believe you are guessing from a picture? Many wheels will fit the front hub in my experience. But, of course, you must try before you buy. Plenty of used 6066 wheels available. 70's and up to about 87 rally wheels are nice too. BTW, in my opinion, on a 4x4, smaller 15" wheels with larger tires looks better, meaner. I know the fad now is 20's, 22's and all that. I am old school and 15" with a bit larger tire looks better to me. Last edited by AZKen; February 7th, 2016 at 07:51 PM. |
#3
|
||||
|
||||
Re: 4x4 Wheels
Here are the 15" wide variety but also available in 15x6. The 4 nubs would be great in case you update to disc brakes later. The 16" from the 71, 72 Blazers I think are 16x5 and require more searching.
Links shown just for reference. Look at this on eBay: http://www.ebay.com/ulk/itm/281929518866 67-72 73-87 60's 70's80's 15x8 4x4 6 Lug Chevrolet Truck K5 Blazer Steel Wheels http://www.ebay.com/ulk/itm/141836918294 6 LUG STEEL 16". For drum brakes
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
#4
|
|
Re: 4x4 Wheels
Quote:
The stock 15's from my '70 K5 Jimmy went on my '55 GMC and fit perfectly as I got a set of rallys for the Jimmy. Tires are also much more affordable in the 15" size. The '55 originally had a 16" wheel too but they were long gone when I got the truck. Managed to find two of them at a decent price but everything else I found was stupid expensive. Since I drive the crap out of the '55 I decided to go with the 15" setup for budget reasons, and they look nice too. One of my sisters and her husband live in Littleton. DAC
__________________
Doug Crawford Rapid City, SD 1970 GMC K5 Jimmy Mom drove 30 years 1972 GMC C2500 owned since 1979 1955 GMC 100 driver-project 2006 GMC Yukon Denali---wife's truck Hope to have a '60 GMC Suburban again someday |
#5
|
||||
|
||||
Re: 4x4 Wheels
Thanks all!
|
#6
|
||||
|
||||
Re: 4x4 Wheels
I found a set of (5) 16" x 7", 6 lug steel wheels with the 4 nubs. The guy said they came off of a 76 Chevy truck. I haven't picked them up yet, but I was wondering if they require the 10.5" or 12" dog dish hubcaps? I believe the 12" GMC caps are much harder to find, especially with the front 4x4 hub cut-outs. Anyone know if these require the 12" hubcaps? Any other cap options for the 16" steelies?
|
#7
|
||||
|
||||
Re: 4x4 Wheels
KC, please post photos of those wheels. I always though those were 16x5 and also; they are tough to find if they are the ones I'm thinking of.
I have a set of hubcaps I'll have to measure up that may be correct for those wheels.
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
#8
|
||||
|
||||
Re: 4x4 Wheels
Sure, here are pics of the wheels. Thanks!
|
#9
|
||||
|
||||
Re: 4x4 Wheels
Thanks for posting those KC; those are the 15 x 7 and a nice find; Width is measured on inside, bead to bead and its stamped somewhere on that wheel.
I have to correct that the 16's are 6" wide. I've been told they were found on forestry trucks.
__________________
1961 GMC Suburban 305A Overdrive 1962 GMC Utility 305D |
#10
|
||||
|
||||
Re: 4x4 Wheels
Dang! I thought they were 16" rims. These pics show the stance and look I am shooting for with 7.50-16 tires or something similar. I don't think they make a 15" tire that is as tall and narrow as these?
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Re: [6066 GMC] Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside | Archiver | Previous Forum Posts | 0 | August 9th, 2010 01:19 AM |
Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside | Archiver | Previous Forum Posts | 0 | August 8th, 2010 01:36 AM |
Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside | Archiver | Previous Forum Posts | 0 | July 12th, 2010 02:55 AM |
Re: OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside | Archiver | Previous Forum Posts | 0 | July 12th, 2010 01:34 AM |
OEM Steel Wheels and Hubcaps - 1963 GMC 1500 4x4 fenderside | Archiver | Previous Forum Posts | 0 | July 11th, 2010 01:42 AM |