6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Transmissions and Rear Ends
#Sponsored

Transmissions and Rear Ends Three on the tree or four in the floor? Shift it all here.

Reply
 
Thread Tools
  #1  
Old October 16th, 2025, 05:25 PM
ManicGMC ManicGMC is offline
Junior Member
 
Join Date: Aug 2025
Location: Beaverton, OR
Truck: 1963 2503
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 0
ManicGMC is on a distinguished road
Default Trans ID and Date

I have a 63 gmc and after some initial research it appears that when the small block chevy was swapped in they also swapped in an sm465 and maybe a different rear end.

For the transmission, see the attached pic. Want to confirm this is an sm465 and would like to figure out how to nail down the manufacture date.

Stamp ID:
465452
9312

I believe the 465452 points to a sm465. The date code 9312 might refer to 9 month but then 31 wouldnt be the day of the month because september doesnt have 31 days. Finally the 2 might be 72? 82? Thanks for any help.
Attached Images
File Type: jpg IMG_20251015_171119007_MP.jpg (7.75 MB, Multiple views, 3 clicks)
Reply With Quote
  #2  
Old October 19th, 2025, 01:22 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,476
Thanks: 75
Thanked 18 Times in 13 Posts
Rep Power: 500
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: Trans ID and Date

if reverse is left and down, it's a 420. If it's right and down, it's 465.
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #3  
Old October 19th, 2025, 03:45 PM
ManicGMC ManicGMC is offline
Junior Member
 
Join Date: Aug 2025
Location: Beaverton, OR
Truck: 1963 2503
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 0
ManicGMC is on a distinguished road
Default Re: Trans ID and Date

Yeah it's right and down, was one of the things that clued me in to it not being a 420 once I started researching it and realizing it wasn't just the engine that had been swapped.

Was hoping to get some info on decoding the stamp on a 465, I have yet to find those specifics when searching on the web.
Reply With Quote
  #4  
Old October 20th, 2025, 12:02 AM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1967
Posts: 923
Thanks: 20
Thanked 34 Times in 18 Posts
Rep Power: 365
Ed Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura about
Default Re: Trans ID and Date

Quote:
Originally Posted by FetchMeAPepsi View Post
if reverse is left and down, it's a 420. If it's right and down, it's 465.
The original 435 in my '67 pickup is also right and down for reverse.
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1967 CM1500 pickup 351E & NP435
Reply With Quote
  #5  
Old October 20th, 2025, 01:44 AM
Funky61's Avatar
Funky61 Funky61 is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Corona, CA
Truck: 1961 Suburban 1962 GMC Utility
Posts: 1,209
Thanks: 75
Thanked 30 Times in 23 Posts
Rep Power: 438
Funky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really nice
Default Re: Trans ID and Date

From what I found the casting numbers on case are GM 465452, 6273212 or 3901127 to indicate the SM465.
Also top shift cover should read GM390113.

From a Muncie transmission website I found I interpreted the 9312 as;
9=1969, 3-3rd month MARCH, 12 is 12th day


Just my read on those 4 numbers and how other transmissions were broken down on that website. There is nothing specific on the 465 there.

https://www.dmetransmissions.com/casecodes
__________________
1961 GMC Suburban 305A Overdrive
1962 GMC Utility 305D
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Truck Vin ID when no ID tag visible geokoppmann General Discussion 2 April 13th, 2015 08:10 PM
Court Date for my '66 Onuma General Discussion 7 April 25th, 2014 11:44 PM
Site Up date once more. Archiver Previous Forum Posts 0 May 10th, 2001 01:41 AM
Major Up-date Done!!!! Archiver Previous Forum Posts 0 January 2nd, 2001 12:04 AM
Site Up date Archiver Previous Forum Posts 0 February 12th, 2000 02:12 AM


All times are GMT +1. The time now is 07:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 541761171231|1760035488|0